Will not boot
-
@Andrew-Donnelly Oh, it seems that you are not using our uboot. 0x20000 only works with our uboot. Not sure which uboot you are using.
-
@Boken-Lin said:
@Andrew-Donnelly Oh, it seems that you are not using our uboot. 0x20000 only works with our uboot. Not sure which uboot you are using.
I'm using your manufacturing build's U-Boot. Please look at thread https://community.onion.io/topic/56/omega-doesn-t-to-appear-to-be-working and you'll see I have the same U-Boot as the other guy and it was advised to him that he had the manufacturing build of the OS and U-Boot on his device, same as mine. All I'm asking for is instructions to flash the device over from the manufacturing TEST BUILD to the current official build, there must be a way to do it, otherwise how could you have flashed all those devices before shipping them out?
-
@Andrew-Donnelly I see what you are trying to do. The way we did it was flashing using the Ethernet Expansion. Do you have an Expansion Dock and Ethernet Expansion?
-
@Boken-Lin Yes, I do, how else would I get the TFTP to work like I did? Wifi doesn't work in the bootloader.
-
@Andrew-Donnelly Good point, lol.
-
It would have been nice to know that one could only de-brick an Onion Omega by way of the Ethernet Port before we chose our expansions during the kickstarter campaign. -1
-
My Omega2+ console page isn't loading after fireware update(intitall setup), my other one is fine, the light on the Omega keeps blinking, reset seems to not work and can't connect via serial(have drivers n putty(win8.1), any suggestions??
-
@Mike-Anthony Reviving a year-old post related to the Omega1? :thinking:
Well, you really need to get MORE details from you Omega2+, so my advice is for you to continue working on that serial issue.
https://community.onion.io/topic/1329/tip-switch-the-omega-to-verbose
-
@fossette I just got the serial to work, I tried forcing the new firmware, and even downgrading, and then re-updating both via web and serial, the light contines to blink, it never stops, the web interface goes down after 5 mins and back to the pic above, passwords/wifi passwords never stick on either the broken or working device
-
@Mike-Anthony This now looks like a completely different problem. You should start a new topic and share the serial output when the Omega2+ cycles from ON to OFF to ON by itself. This will provide hints for the experts here in this community.
Also, keep in mind that the Web Console feature has issues. Search this forum for more details about what may be acting weird. My advice is to set permanent configuration values that you need using the SSH command line.
