@Sycol said in Kernel Panic! No Working init found.: I ran the firmware update from the webapp for my 2+. It bricked. I've noticed that my problem is with the kernel.Ive tried with this http://community.onion.io/topic/1154/omega-2-usb-firmware-install-after-brick-resolved but i cant even get the menu with the reset up. Try this way please: power OFF your Omega2+ press and hold down the Reset button (the momentary push button between the FW_RST pin and the +3.3V) switch the Omega's power ON and after this you should see the UBoot menu on the serial console... Good luck!