Omega hangs and reboots after a few fast-gpio sets

George Delaportas · 14 Sept 2016, 11:45

Hi there,

My Omega keeps rebooting after I do a few "fast-gpio set 15 0" and "fast-gpio set 15 1".
The same happens with Pin 16, 17 and pretty much all available pins...

Is there a workaround?

Thanks!

fossette · 14 Sept 2016, 17:22

Is there anything connected to these pins that would draw too much current? What is your circuit?

George Delaportas · 16 Sept 2016, 15:58

@fossette Yeap that was it. I figured out the relay I had on these pins was causing a massive Amps' draw for a few milliseconds. That of course cause Omega to reboot due to "power loss".

Thanks anyway!