Disable AP and set static IP
-
And here's the ifconfig output with DHCP:
root@Omega-3DA9:/# ifconfig apcli0 Link encap:Ethernet HWaddr 88:1E:59:01:3D:AB inet addr:192.168.5.186 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::8a1e:59ff:fe01:3dab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:1595 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) br-wlan Link encap:Ethernet HWaddr 88:1E:59:01:3D:A9 inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0 inet6 addr: fe80::8a1e:59ff:fe01:3da9/64 Scope:Link inet6 addr: fd1d:48c4:7633::1/60 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:7305 (7.1 KiB) eth0 Link encap:Ethernet HWaddr 88:1E:59:01:3D:AA inet6 addr: fe80::8a1e:59ff:fe01:3daa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:533 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:176870 (172.7 KiB) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:286 errors:0 dropped:0 overruns:0 frame:0 TX packets:286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:20014 (19.5 KiB) TX bytes:20014 (19.5 KiB) ra0 Link encap:Ethernet HWaddr 88:1E:59:01:3D:A9 inet6 addr: fe80::8a1e:59ff:fe01:3da9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:6
-
@drmoeder Please post your ifconfig when using static ip also output of route command.
-
Here are those outputs using static IP.
I also pinged the gateway at the endroot@Omega-3DA9:/# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes ping: sendto: Network unreachable root@Omega-3DA9:/# root@Omega-3DA9:/# traceroute 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 38 byte packets 1traceroute: sendto: Network unreachable root@Omega-3DA9:/# root@Omega-3DA9:/# ifconfig apcli0 Link encap:Ethernet HWaddr 88:1E:59:01:3D:AB inet addr:192.168.5.88 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::8a1e:59ff:fe01:3dab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:9316 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) br-wlan Link encap:Ethernet HWaddr 88:1E:59:01:3D:A9 inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0 inet6 addr: fe80::8a1e:59ff:fe01:3da9/64 Scope:Link inet6 addr: fd1d:48c4:7633::1/60 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:5768 (5.6 KiB) eth0 Link encap:Ethernet HWaddr 88:1E:59:01:3D:AA inet6 addr: fe80::8a1e:59ff:fe01:3daa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:2929 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:994005 (970.7 KiB) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:294 errors:0 dropped:0 overruns:0 frame:0 TX packets:294 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:20510 (20.0 KiB) TX bytes:20510 (20.0 KiB) ra0 Link encap:Ethernet HWaddr 88:1E:59:01:3D:A9 inet6 addr: fe80::8a1e:59ff:fe01:3da9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:6 root@Omega-3DA9:/# ping 192.168.5.254 PING 192.168.5.254 (192.168.5.254): 56 data bytes 64 bytes from 192.168.5.254: seq=0 ttl=64 time=11.243 ms 64 bytes from 192.168.5.254: seq=1 ttl=64 time=6.952 ms 64 bytes from 192.168.5.254: seq=2 ttl=64 time=10.411 ms 64 bytes from 192.168.5.254: seq=3 ttl=64 time=4.754 ms 64 bytes from 192.168.5.254: seq=4 ttl=64 time=5.466 ms
-
@drmoeder please add the output of the route command. If you set the static ip to 192.168.5.186 does it work? Not sure if you are behind a firewall
-
The output to traceroute is in there. It says 'Network unreachable'.
I just tried setting static ip to 192.168.5.186 and that also does NOT work.
-
@drmoeder I'm asking for the output of the "route" command, not "traceroute"
-
Oh sorry my mistake.
root@Omega-3DA9:/# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
And with dhcp:
round-trip min/avg/max = 19.924/24.932/32.018 ms root@Omega-3DA9:/# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.5.254 0.0.0.0 UG 0 0 0 apcli0 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
@drmoeder As I expected there is no default route, so you need to add one, add to your network configuration:
option gateway '192.168.5.254'
option netmask '255.255.240.0'
-
I thought I had done that. Am I missing something?
root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option netmask '255.255.240.0' option gateway '192.168.5.254' option dns '8.8.8.8' option ipaddr '192.168.5.186' option proto 'static' config interface 'wan' option ifname 'eth0' option proto 'dhcp'
-
@drmoeder Add the following to your /etc/config/network
config route 'default'
option interface 'wwan'
option gateway '192.168.5.254'
option target '0.0.0.0'
option netmask '0.0.0.0'
option metric '0'Then restart.
-
Still no luck.
root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option proto 'static' option ipaddr '192.168.5.88' option gateway '192.168.5.254' option netmask '255.255.240.0' option dns '8.8.8.8' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config route 'default' option interface 'wwan' option gateway '192.168.5.254' option target '0.0.0.0' option netmask '0.0.0.0' option metric '0' root@Omega-3DA9:/etc/config# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan root@Omega-3DA9:/etc/config# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes ping: sendto: Network unreachable
-
@drmoeder try this:
ip route add default via 192.168.5.254 dev apcli0
ip route get 8.8.8.8
ping 8.8.8.8
-
That worked!
root@Omega-3DA9:/etc/config# ip route add default via 192.168.5.254 dev apcli0 root@Omega-3DA9:/etc/config# ip route get 8.8.8.8 8.8.8.8 via 192.168.5.254 dev apcli0 src 192.168.5.88 root@Omega-3DA9:/etc/config# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: seq=0 ttl=117 time=21.440 ms 64 bytes from 8.8.8.8: seq=1 ttl=117 time=21.110 ms 64 bytes from 8.8.8.8: seq=2 ttl=117 time=24.762 ms 64 bytes from 8.8.8.8: seq=3 ttl=117 time=30.374 ms 64 bytes from 8.8.8.8: seq=4 ttl=117 time=39.886 ms ^C --- 8.8.8.8 ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 21.110/27.514/39.886 ms root@Omega-3DA9:/etc/config# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.5.254 0.0.0.0 UG 0 0 0 apcli0 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
@drmoeder ok but it will stop working when you restart the network, please post your entire /etc/config/network file
-
root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option proto 'static' option ipaddr '192.168.5.88' option netmask '255.255.240.0' option gateway '192.168.5.254' option dns '8.8.8.8' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config route 'default' option interface 'wwan' option gateway '192.168.5.254' option target '0.0.0.0' option netmask '0.0.0.0' option metric '0'
-
@drmoeder In the default route, remove target and netmask options. Then use service network restart or reboot and check your routing table again.
-
Not working with those options removed.
root@Omega-3DA9:/# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan root@Omega-3DA9:/# cd etc/config root@Omega-3DA9:/etc/config# cat network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option ula_prefix 'fd1d:48c4:7633::/48' config interface 'wlan' option type 'bridge' option proto 'static' option ipaddr '192.168.3.1' option netmask '255.255.255.0' option ip6assign '60' config interface 'wwan' option ifname 'apcli0' option hostname 'Omega-3DA9' option proto 'static' option ipaddr '192.168.5.88' option netmask '255.255.240.0' option gateway '192.168.5.254' option dns '8.8.8.8' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config route 'default' option interface 'wwan' option gateway '192.168.5.254' option metric '0' root@Omega-3DA9:/etc/config# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes ping: sendto: Network unreachable root@Omega-3DA9:/etc/config# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.240.0 U 0 0 0 apcli0 192.168.3.0 * 255.255.255.0 U 0 0 0 br-wlan
-
@drmoeder hmmm not sure why this is not updating the routing table, perhaps someone else has an idea. But here is a workaround for you as I'm going to be offline for the next 24 hours so this will fix the issue for you.
Put this script in /etc/hotplug.d/iface/40-wwan-up-route:
#!/bin/sh
TARGET_INTERFACE="wwan"logger -t route "Starting interface hotplug device: ${DEVICE} Action: ${ACTION} Interface: ${INTERFACE}"
if [ "$ACTION" = "ifup" -a "$INTERFACE" = "$TARGET_INTERFACE" ]; then
logger -t route "IFUP ${DEVICE}"
/sbin/ip route add default via 192.168.5.254 dev "${DEVICE}" >/dev/nullfi
This scripts runs whenever the interface comes up and adds the route. I just wrote this for you based on another of my scripts so give it a test and let me know how you go. As you can see it logs the activity so if you have any issues post those log entries.
-
That didn't work.
And I don't know where to retrieve the log from.
It didn't show up in the command line output