Omega2+: reboot and sd card fixed!

[WereCatf]

@B-T What do df -h|grep "mmcblk0" and ls -l /dev/mmcblk* give you?

[Vinh]

Setting up Omega2+ is more a frustration compared to Raspberry Pi or Arduino.

Anyone knows a workaround to get SD Card working (I already tried build 149)?
df : always doesn't show the card
dmesg shows me my card:
...
MTK MSDC device init.
mtk-sd: MediaTek MT6575 MSDC Driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usb-storage
init: - preinit -
mmc0: new high speed SDHC card at address xxxx
mmcblk0: mmc0:xxxx SL32G 29.0 GiB
random: procd: uninitialized urandom read (4 bytes read, 9 bits of entropy available)
mmcblk0: p1
...

[WereCatf]

@Vinh-Tran Have you formatted the card? It's supposed to also spit out a line similar to mmcblk0: p1 after those lines you have there, if there is a partition on the card.

[Vinh]

@WereCatf sorry, figured out that the latest system is too lazy. it didn't mount the sd card.
I solve it by creating a new folder and using mount command.

I also edited my previous post with the missing information

[Paul Kourany]

With v1.9 firmware, the SD is automounted at /tmp/mounts/SD-P1

[Costas Costas]

and if you have a second partition it will be mounted at /tmp/mounts/SD-P2 etc

[anglo marc]

hi dears
i'm new in this field , just start from several days , im facing problem with my SD , may be im not searching well but when i open the status , no change in storage amount ,
any help plz ?
what is the cmd should use it to check that ?

[Gabriel Ongpauco]

@anglo-marc

We just released a quick tutorial on how to work with SD cards here: Using a MicroSD Card.

Gabe

[Chris Parker]

@Gabriel-Ongpauco said in Omega2+: reboot and sd card fixed!:

Using a MicroSD Card

Gabriel,

I'm assuming that the card needs to be pre formatted to FAT 32 or something similar? The tutorial makes no mention of supported formats hence the question.
I use a Mac at home so if I format any cards I would need to ensure that I choose an appropriate option.

Chris

[Luciano S.]

Mine was read/writable when i plugged in. It came Fat32 formatted.

If you want to use it as a boot able memory you need to format it to ext4.

[Paul Jobson]

Here's a tutorial of how I'm using the SDCARD on my device. My use-case is pretty specific, though you can modify my instructions to your own needs.

https://github.com/pjobson/onion_omega2p_experiments/blob/master/docs/setting_up_sdcard_for_root_and_swap.md

[Lisa Lyons]

I applied the latest update, per your instructions, then decided I'd set up my SD Card per:

https://docs.onion.io/omega2-docs/boot-from-external-storage.html#boot-from-external-storage-mounting-the-external-storage-device

For some reason, while the "block detect" command did come up with a useful output, I couldn't redirect that output to /etc/config/fstab - So I did it manually!

However, despite working through all of that, on reboot the Omega 2+ I have doesn't remember there was an SD card in the slot! I have to eject the SD Card, and reinsert it, and then the OS sees it.

Which means that I can't boot from it....

[Alejandro Torrente]

I have the same problem that the last comment