Wifi access on a new upgrade
Having issue on omega connecting to the internet - ideally I want to factory reset the device but that does not seem to be an easy task
I would like to run
opkg install onion-console-base
but cant get connected on the internet
On the first boot I was fine got connected to the internet downloaded and install the fireware update - set some parameters
on further boots cant get to the device to open in the browser - Ive currently used 2 omega's and I at the same point in time with both
cant get the device to connect to the the internet or via the serial on mac... so Im left with ssh
so I downloaded the image locally and copied it via scp
scp /Users/xxx/Downloads/omega2p-v0.1.9-b157.bin root@omega-2E93.local:/tmp/omega2p-v0.1.9-b157.bin
cp omega2p-v0.1.9-b157.bin omega2.bin
root@Omega-2E93:/tmp# sysupgrade -n omega2.bin
killall: watchdog: no process killed
Sending TERM to remaining processes ... uhttpd device-client onion-helper udhcpc avahi-daemon dnsmasq udhcpc wifimanager wifimanager wifimanager mountd ntpd ubusd askfirst logd rpcd netifd odhcpd
Sending KILL to remaining processes ... askfirst
Switching to ramdisk...
Performing system upgrade...
Unlocking firmware ...
Writing from <stdin> to firmware ...
umount: can't unmount /dev/pts: Resource busy
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
has the device been update currently - ant thing else I can try
Downloaded the latest binary and ran it on the plus works now I have access to wifi !!! on the first boot for some reason the browser endpoint drops on hitting the page after a reboot
if you are not using an omega2+ then you need to download omega2-v0.1.10-b160.bin instead of omega2p-v0.1.10-b160.bin
So for the plus
scp $(pwd)/omega2p-v0.1.10-b160.bin email@example.com:/tmp/omega2p-v0.1.10-b160.bin
sysupgrade -n /tmp/omega2p-v0.1.10-b160.bin
reboot the device
then ssh into the device again >> ssh firstname.lastname@example.org
note the updated firmware in the banner....
and run wifisetup
then launch the omega setup in the browser
on reboot the browser window displays none of the icons - so its the same as my initial post but at least I can recover to a starting point to test the device