Permanent gpiomux - configuration after boot
I want to setup a permanent gpiomux configuration on my omega2.
At the moment I have to enter at every boot the following command to setup my gpio configuration
omega2-ctrl gpiomux set pwm0 pwm
I tried to put this line into the '/etc/rc.local' file without success.
My question is how to configure this gpiomux settings in a way that after a reboot the configuration is available?
If I put
omega2-ctrl gpiomux set pwm0 pwmin a script.sh file and run it then I get the following message:
unknown group/function combination.
Does anybody has an idea how to resolve this issue?