We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

[need help] bought a 4 bits digital LED module

  • @Maximilian-Gerhardt sorry for the long wait. I had some problems building the toolchain. anyway, after editing some environment variables from your makefile, tried building your repo, and compiling it successfully I guess.

    $ make
    mipsel-openwrt-linux-g++ -o tm1637_example_display -O3 -ggdb -g -Wall -Wextra -std=c++14 -I /home/docker-user/omega/source/staging_dir/target-mipsel_24kc_musl-1.1.16/usr/include -I /home/docker-user/omega/omega2-tm1637/omega_includes -L /home/docker-user/omega/source/staging_dir/target-mipsel_24kc_musl-1.1.16/usr/lib -L /home/docker-user/omega/omega2-tm1637/omega_libs -L. example_display.cpp TM1637.cpp Arduino.cpp  -loniondebug -lugpio
    In file included from Arduino.cpp:3:0:
    /home/docker-user/omega/omega2-tm1637/omega_includes/ugpio.h:57:39: warning: unused parameter 'gpio' [-Wunused-parameter]
     inline int gpio_is_valid(unsigned int gpio)
    /home/docker-user/omega/omega2-tm1637/omega_includes/ugpio.h:73:39: warning: unused parameter 'gpio' [-Wunused-parameter]
     inline int gpio_cansleep(unsigned int gpio)

    then after scp'ing to my omega, then running it.

    Beginning to test program
    > exporting gpio 8
    > setting to input
    > exporting gpio 9
    > setting to input
    > setting to input
    > setting to input
    > setting to input
    > setting to input
    > setting to input

    unfortunately, there is nothing displayed..

    btw, does

            uint8_t pinClk = 18;
            uint8_t pinData = 19;

    needs to be 18 and 19? I don't have that.. I am using a power dock 1, not 2.. tried changing it to other GPIO, but still not working..

  • Tomorrow I'll have the real hardware and test and debug it. Could be a timing issue. Would have been a wonder if it worked on the first try anyways.

    The GPIOs can be arbitrary. VCC and GND of the module have to always go to 3.3V and GND though.

    I don't find a reference to Power Dock 1.. What pins are available there? But you are testing this on an Omega2, right?

  • @Maximilian-Gerhardt thanks! tried quick hacking the library, but no work.. my knowledge of writing data for this is still limited..

    I am pretty sure I am using the correct device..

    and the dock is this from that image, mine is quite different, the layout is different from the expansion.. I dont know why. don't have pins 21/20

  • You have VCC on +5V, but all the logic is on the Omega2 is 3.3V and the display module must also get 3.3V. That hopefully shouldn't have damaged the module or your Omega.. I'll see when I get the hardware šŸ™‚

    Edit: Hardware just arrived. Working on this this evening.

  • Found the bug. My Arduino abstraction layer was setting the pin to HIGH after it was initialized as OUTPUT pin, while the actual Arduino implementation sets it LOW. This is also what the code expects.

    Changing gpio_direction_output(pin, HIGH) to gpio_direction_output(pin, LOW) in pinMode() gives you the same result as on an Arduino Uno: (Test code activates all segments)


    Fix and more description will be in the repo soon. Now I should be able to write a python version.

  • @Maximilian-Gerhardt awesome!! Fantastic job! I am glad it's working on to you.

  • damn got it now! finally. this is the sample code I got.

    after setting HIGH to LOW in pinMode() of Arduino.cpp

     } else if (mode == OUTPUT) {
                    if ((rv = gpio_direction_output(pin, LOW)) < 0) {
    #include <stdio.h>
    #include <stdlib.h>
    #include <unistd.h>
    #include "TM1637.h"
    int main() {
            int k;
            printf("Beginning to test program\n");
            uint8_t pinClk = 2;
            uint8_t pinData = 3;
            TM1637Display display(pinClk, pinData);
            uint8_t data[] = { 0xff, 0xff, 0xff, 0xff };
            display.showNumberDec(153, false, 3, 1);
            return 0;


  • Repository was updated with a fixed version and better demo -- now the Python versions is coming.

  • @Maximilian-Gerhardt this should be added in the examples! looks amazing! thank you!

Log in to reply

Looks like your connection to Community was lost, please wait while we try to reconnect.