Omega2+ incorrectly detects all SSIDs as hidden



  • This post is deleted!


  • @D-S
    Without any information to analyse it's not possible to help you, unless someone has experienced exactly the same problem and overcome it.

    Have you tried following these FAQ items?

    The information output from them may help us to understand what is happening on your site.

    Otherwise, if you feel that this is too advanced for you at the moment, please describe what steps you are following (with links to the documentation) and perhaps provide some screenshots of the outcome showing the problems that you are facing.



  • @cas here you go

    BusyBox v1.25.1 () built-in shell (ash)


    / __ ___ ()_ ___ / __ __ _ ___ ___ ____ _
    / // / _ / / _ / _ \ / // / ' / -) _ / _/
    _
    /////_//// _////_/_, /_,/
    W H A T W I L L Y O U I N V E N T ? /
    __/

    Ω-ware: 0.2.1 b199

    root@Omega-EB51:~# wifisetup
    Onion Omega Wifi Setup

    Select from the following:

    1. Scan for Wifi networks
    2. Type network info
      q) Exit

    Selection: 1
    Scanning for wifi networks...

    Select Wifi network:

    1. [hidden]
    2. [hidden]
    3. Volumio
    4. [hidden]
    5. [hidden]

    Selection: ^C
    root@Omega-EB51:~# iwconfig
    lo no wireless extensions.

    ra0 RTWIFI SoftAP ESSID:"Omega-EB51"
    Mode:Managed Channel=10 Access Point: 40:A3:6B:C2:EB:51
    Bit Rate=150 Mb/s

    eth0 no wireless extensions.

    br-wlan no wireless extensions.

    apcli0 RTWIFI SoftAP ESSID:""
    Mode:Managed Channel=10 Access Point: Not-Associated
    Bit Rate:150 Mb/s

    root@Omega-EB51:~# ifconfig
    apcli0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:52
    inet6 addr: fe80::42a3:6bff:fec2:eb52/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    br-wlan Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:51
    inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
    inet6 addr: fd1d:48c4:7633::1/60 Scope:Global
    inet6 addr: fe80::42a3:6bff:fec2:eb51/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:186346 errors:0 dropped:0 overruns:0 frame:0
    TX packets:179832 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:13758954 (13.1 MiB) TX bytes:15803494 (15.0 MiB)

    eth0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:52
    inet6 addr: fe80::42a3:6bff:fec2:eb52/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1402 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:476840 (465.6 KiB)
    Interrupt:5

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:6573 errors:0 dropped:0 overruns:0 frame:0
    TX packets:6573 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1
    RX bytes:400816 (391.4 KiB) TX bytes:400816 (391.4 KiB)

    ra0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:51
    inet6 addr: fe80::42a3:6bff:fec2:eb51/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:192982 errors:7 dropped:0 overruns:0 frame:0
    TX packets:178813 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:20338723 (19.3 MiB) TX bytes:13207291 (12.5 MiB)
    Interrupt:6

    root@Omega-EB51:~# ifconfig apcli0
    apcli0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:52
    inet6 addr: fe80::42a3:6bff:fec2:eb52/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    root@Omega-EB51:~# logread | grep ap_client
    Thu Oct 18 20:48:23 2018 kern.info ap_client: 'apcli0' assoc: no, mac: 00:00:00:00:00:00
    Thu Oct 18 20:48:23 2018 kern.info ap_client: Scanning for networks...
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 0: 4 Volumio b8:27:eb:1f:b4:d8 WPA2PSK (AES) -60
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 1: 1 e6:cb:bc:49:f7:22 WPA2PSK (AES) -67
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 2: 1 e0:cb:bc:49:f7:22 WPA2PSK (AES) -68
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 3: 6 e6:cb:bc:49:fa:15 WPA2PSK (AES) -71
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 4: 11 e0:cb:bc:49:ff:91 WPA2PSK (AES) -82
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 5: 11 e6:cb:bc:49:ff:91 WPA2PSK (AES) -82
    Thu Oct 18 20:48:25 2018 kern.info ap_client: no configured networks found in the site survey
    Thu Oct 18 20:48:33 2018 kern.info ap_client: 'apcli0' assoc: no, mac: 00:00:00:00:00:00
    Thu Oct 18 20:48:33 2018 kern.info ap_client: Scanning for networks...
    <snip snip>

    root@Omega-EB51:~# wifisetup debug
    Collected WiFi and network debug information in /tmp/wifidebug.log file
    root@Omega-EB51:~# cat /tmp/wifidebug.log
    ================ WIFI DEBUG LOG ================
    == Thu Oct 18 21:04:10 GMT 2018 ==

    ================ ifconfig ================
    apcli0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:52
    inet6 addr: fe80::42a3:6bff:fec2:eb52/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    br-wlan Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:51
    inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
    inet6 addr: fd1d:48c4:7633::1/60 Scope:Global
    inet6 addr: fe80::42a3:6bff:fec2:eb51/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:199101 errors:0 dropped:0 overruns:0 frame:0
    TX packets:192284 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:14683554 (14.0 MiB) TX bytes:16997787 (16.2 MiB)

    eth0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:52
    inet6 addr: fe80::42a3:6bff:fec2:eb52/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1457 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:495650 (484.0 KiB)
    Interrupt:5

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:6837 errors:0 dropped:0 overruns:0 frame:0
    TX packets:6837 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1
    RX bytes:416920 (407.1 KiB) TX bytes:416920 (407.1 KiB)

    ra0 Link encap:Ethernet HWaddr 40:A3:6B:C2:EB:51
    inet6 addr: fe80::42a3:6bff:fec2:eb51/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:206149 errors:7 dropped:0 overruns:0 frame:0
    TX packets:191192 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:21708795 (20.7 MiB) TX bytes:14221423 (13.5 MiB)
    Interrupt:6

    ================ iwconfig ================
    lo no wireless extensions.

    ra0 RTWIFI SoftAP ESSID:"Omega-EB51"
    eth0 no wireless extensions.

    br-wlan no wireless extensions.

          Mode:Managed  Channel=10  Access Point: 40:A3:6B:C2:EB:51   
          Bit Rate=150 Mb/s   
    

    apcli0 RTWIFI SoftAP ESSID:""
    Mode:Managed Channel=10 Access Point: Not-Associated
    Bit Rate:150 Mb/s

    ================ uci show wireless ================
    wireless.radio0=wifi-device
    wireless.radio0.type='ralink'
    wireless.radio0.variant='mt7628'
    wireless.radio0.country='US'
    wireless.radio0.hwmode='11g'
    wireless.radio0.htmode='HT40'
    wireless.radio0.channel='auto'
    wireless.radio0.disabled='0'
    wireless.radio0.device_mode='apsta'
    wireless.radio0.op_mode='preference'
    wireless.ap=wifi-iface
    wireless.ap.device='radio0'
    wireless.ap.mode='ap'
    wireless.ap.network='wlan'
    wireless.ap.ifname='ra0'
    wireless.ap.encryption='psk2'
    wireless.ap.key='12345678'
    wireless.ap.disabled='0'
    wireless.ap.ssid='Omega-EB51'
    wireless.sta=wifi-iface
    wireless.sta.device='radio0'
    wireless.sta.mode='sta'
    wireless.sta.ifname='apcli0'
    wireless.sta.encryption='psk2'
    wireless.sta.ssid='YourSsidHere'
    wireless.sta.key='YourPasswordHere'
    wireless.sta.network='wwan'
    wireless.sta.disabled='0'
    wireless.@wifi-config[0]=wifi-config
    wireless.@wifi-config[0].key='0SL3R2017'
    wireless.@wifi-config[0].ssid='OslerWifi'
    wireless.@wifi-config[0].encryption='psk2'

    root@Omega-EB51:~#



  • @D-S If I were you I'd try to solve this issue simply with a Factory Reset (except if this is some academic research ;-).

    ================ uci show wireless ================
    ...
    wireless.@wifi-config[0].key='0SL3R2017'
    wireless.@wifi-config[0].ssid='OslerWifi'
    wireless.@wifi-config[0].encryption='psk2'

    If OslerWiFi is not a public AP then now the owner should change the 0SL3R2017 password - just in case.



  • @D-S

    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 0: 4 Volumio b8:27:eb:1f:b4:d8 WPA2PSK (AES) -60
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 1: 1 e6:cb:bc:49:f7:22 WPA2PSK (AES) -67
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 2: 1 e0:cb:bc:49:f7:22 WPA2PSK (AES) -68
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 3: 6 e6:cb:bc:49:fa:15 WPA2PSK (AES) -71
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 4: 11 e0:cb:bc:49:ff:91 WPA2PSK (AES) -82
    Thu Oct 18 20:48:25 2018 kern.info ap_client: network 5: 11 e6:cb:bc:49:ff:91 WPA2PSK (AES) -82

    Apart from 'Volumio', they don't seem to have any names.
    These mac addresses appear to be somewhat closely related:
    e6:cb:bc:49:f7:22
    e0:cb:bc:49:f7:22

    e0:cb:bc:49:ff:91
    e6:cb:bc:49:ff:91

    Are there really 6 different AP's in range?

    What names are these AP's seen as by your other devices?

    Perhaps, as @György-Farkas suggests, a reset of your device may be helpful. Also perhaps an update to the latest firmware may offer a different result.



  • @cas Volumio (b8:27:eb) can be a Raspberry Pi.
    The others (e0:cb:bc) might belong to Cisco Meraki.

    What names are these AP's seen as by your other devices?

    I also would be curious.



  • Factory reset has made no difference whatsoever.
    The SSID names all include ASCII characters and character length is less than 12.

    Any more ideas?



  • @ab
    Not really, unfortunately.

    It seems to me that the current wifi kernel module is unable to correctly interpret one or more of these ASCII characters and since it's a closed source component, you cannot examine it to find out why.

    You might want to log a ticket on the Onion helpdesk and provide them with these ASCII characters, together with a pointer to this thread and a request to troubleshoot the wifi module. Perhaps that way they can enhance the module with some new functionality or a bug fix, whatever may be necessary?

    Apart from that, or perhaps changing your SSID's, I'm not really sure what else to suggest.


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.