Error after upgrate firmware, amber led doesn't blink, turn on to boot and then turn off
-
Here is part of the debug in the console
[ 23.670000] jffs2: CLEANMARKER node found at 0x009a9b00, not first node in bl ock (0x009a0000) [ 23.680000] jffs2: Node at 0x009afc04 with length 0x000006a5 would run over t he end of the erase block [ 23.690000] jffs2: Perhaps the file system was created with the wrong erase s ize? [ 23.700000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0000: 0x93d7 instead [ 23.710000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0004: 0x1c50 instead [ 23.720000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0008: 0x6a25 instead [ 23.730000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b000c: 0x7937 instead [ 23.740000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0010: 0xb350 instead [ 23.750000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0014: 0x38ed instead [ 23.760000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0018: 0x1ffd instead [ 23.770000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b001c: 0x9d3b instead [ 23.770000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0020: 0x3168 instead [ 23.780000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x009b0024: 0x7fb1 instead [ 23.790000] jffs2: Further such events for this erase block will not be print ed [ 23.820000] jffs2: CLEANMARKER node found at 0x009b9b00, not first node in bl ock (0x009b0000) [ 23.850000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00d8000c: 0xdf48 instead [ 23.870000] jffs2: CLEANMARKER node found at 0x00d89b00, not first node in bl ock (0x00d80000) [ 23.900000] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 o rphan) found. [ 23.910000] VFS: Mounted root (jffs2 filesystem) readonly on device 31:2. [ 23.920000] Freeing unused kernel memory: 236K (80375000 - 803b0000) [ 23.930000] Kernel panic - not syncing: No working init found. Try passing i nit= option to kernel. See Linux Documentation/init.txt for guidance. [ 23.930000] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 82.580000] random: nonblocking pool is initializedPlease helpme!!
-
Hi @Ricardo-Peralta, it seems that the upgrade wasn't performed properly or you might have rebooted the Omega before the firmware upgrade was completed. Can you describe how you performed the upgrade?
Also, in order to restore the Omega you will need the use of the ethernet expansion. Do you happen to have one of those?