We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

How to speed up firmware recovery over usb

  • Firmware installation using the recovery-button is very slow, close to 15 minutes. About 80% of the time is used for reading the data from USB and then programming the internal Flash memory takes the remaining 20%.

    Installation over the web interface is faster with 10 minutes. Installation with sysupgrade from a USB drive is only 5 minutes.

    I looked into the u-boot code and this is very old, about June 2013.
    Where was the Omega2 bootloader forked from?

    Has someone found a way to improve the usb loading speed in recovery mode?

Looks like your connection to Community was lost, please wait while we try to reconnect.