Onion Omega seems to have no wifi

N Willems

@Boken-Lin
No worries, I assume you guys are under a lot of pressure at the moment, so I very much appreciate all your efforts. Accidents happen.

I can confirm my address has not changed.
Please note I only have the mini dock, and I'm not sure Ethernet dock will fit.

N Willems

@Boken-Lin Any news on this? Haven't heard from you guys since my confirmation.

Boken Lin

Hi @N-Willems, We sent out a package to you around two weeks ago. You should be receiving it in a week or so.

Cheers!

N Willems

@Boken-Lin Thanks man!

N Willems

@Boken-Lin
I received the ethernet expansion and matching dock today

Boken Lin

@N-Willems Ok, now you will need to re-flash the Omega with the new firmwares. Please take a look at the wik article here: https://wiki.onion.io/Tutorials/Reflash-The-Firmware-With-Ethernet-Expansion. Can you following the steps until Step 6. Then take a screenshot of your browser window? The re-flash process will be slightly different because you will be flashing on a new uboot first. Once you put up a screenshot here we will walk you over the flashing procedures.

Cheers!

N Willems

@Boken-Lin , I tried, but I can only get to step 4, no httpd.
However, I configured my laptop's networkinterface, and I can ping just fine over the ethernet. And I see a tftpboot command. If I'm not mistaken I only need the correct arguments for it.

Here the output:
(sorry I don't know how to make a codeblock, <pre><code> does not seem to work)

U-Boot 1.1.4 (Aug 28 2015 - 16:51:26)

AP121 (ar9331) U-boot

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 140k for U-Boot at: 83fdc000
Reserving 192k for malloc() at: 83fac000
Reserving 44 Bytes for Board Info at: 83fabfd4
Reserving 36 Bytes for Global Data at: 83fabfb0
Reserving 128k for boot params() at: 83f8bfb0
Stack Pointer at: 83f8bf98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16777216, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot:  0 

**ar7240>** httpd
Unknown command 'httpd' - try 'help'

ar7240> printenv
bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),13184k(uImage),64k(NVRAM),64k(ART)
bootcmd=bootm 0x9f300000
bootdelay=4
baudrate=115200
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee
ipaddr=192.168.1.2
serverip=192.168.1.10
stdin=serial
stdout=serial
stderr=serial
ethact=eth0
Environment size: 361/65532 bytes

**ar7240>** ping 192.168.1.10
dup 1 speed 100
Using eth0 device
host 192.168.1.10 is alive

**ar7240>** tftpboot
*** Warning: no boot file name; using '0201A8C0.img'
Using eth0 device
TFTP from server 192.168.1.10; our IP address is 192.168.1.2
Filename '0201A8C0.img'.
Load address: 0x81000000
Loading: T T ^C
Abort

**ar7240>** ?
reset   - Perform RESET of the CPU
?       - alias for 'help'
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
cp      - memory copy
erase   - erase FLASH memory
help    - print online help
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
progmac - Set ethernet MAC addresses
run     - run commands in an environment variable
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version

Boken Lin

Hi @N-Willems, My mistake. You will first need to use tftp to flash the uboot to the production one first. You can do it by serving a tftp server on your computer, and running the following commands in the current uboot:

setenv ipaddr 192.168.1.1   
setenv serverip 192.168.1.100
tftp 0x80000000 uboot.bin
erase 0x9f000000 +0x10000
cp.b 0x80000000 0x9f000000 0x10000

The uboot binary can be downloaded from: https://s3-us-west-2.amazonaws.com/onion-downloads/openwrt/uboot_for_omega_final.bin. Please make sure that you first disconnect from your Wifi network on your computer, so that the IP address for your computer is assigned properly.

After, you are done with that, you will need to flash the ART partition (which contains Omega WiFi calibration data). You do this by going into the FIrmware re-flash interface, as outlined by the wiki article https://wiki.onion.io/Tutorials/Reflash-The-Firmware-With-Ethernet-Expansion. But, instead of flashing the firmware image, you will click on the link at the bottom of the screen which says ART Update. ART partition binary can be downloaded here: https://s3-us-west-2.amazonaws.com/onion-downloads/openwrt/art_for_omega.bin.

Then, you will need to tell the Omega what it's MAC address is. Reboot again, and enter the uboot prompt, and issue the following command:

setmac 40:A3:6B:C1:06:C5

Finally, you will be flashing the firmware for the Omega, which can be downloaded here: http://repo.onion.io/omega/images/.

N Willems

@Boken-Lin We made it!

Boken Lin

@N-Willems Yay!! That's awesome

N Willems

Thanks for your assistance, great support!