Posts made by Andrew Donnelly

The instructions here https://wiki.onion.io/Tutorials/Reflash-The-Firmware-With-Ethernet-Expansion do not apply. Why might you ask? I have the testing firmware that was loaded to test the boards.

U-Boot 1.1.4 (Aug 28 2015 - 16:51:26)

AP121 (ar9331) U-boot

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 140k for U-Boot at: 83fdc000
Reserving 192k for malloc() at: 83fac000
Reserving 44 Bytes for Board Info at: 83fabfd4
Reserving 36 Bytes for Global Data at: 83fabfb0
Reserving 128k for boot params() at: 83f8bfb0
Stack Pointer at: 83f8bf98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16777216, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot:  0
ar7240> help
reset   - Perform RESET of the CPU
?       - alias for 'help'
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
cp      - memory copy
erase   - erase FLASH memory
help    - print online help
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
progmac - Set ethernet MAC addresses
run     - run commands in an environment variable
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
ar7240> printenv
bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),13184k(uImage),64k(NVRAM),64k(ART)
bootcmd=bootm 0x9f300000
bootdelay=4
baudrate=115200
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee
ipaddr=192.168.1.2
serverip=192.168.1.10
stdin=serial
stdout=serial
stderr=serial
ethact=eth0

Environment size: 361/65532 bytes
ar7240>

I need instructions to completely reflash this with the correct U-Boot and firmware. Serial works, if you can give me a TFTPBOOT capable image to load to the device I could boot from memory and flash it that way. Otherwise, it's useless and I'd like to get a replacement.

Where are the instructions because I got one just like this with the wrong firmware flashed on it and I've been waiting for said instructions forever. I have an expansion dock and ethernet expansion already.

@Boken-Lin Yes, I do, how else would I get the TFTP to work like I did? Wifi doesn't work in the bootloader.

I've been poking around on the i2c applications, seeing if I can use i2cset to interact with the OLED. So far, nothing.

@Boken-Lin said:

@Andrew-Donnelly Oh, it seems that you are not using our uboot. 0x20000 only works with our uboot. Not sure which uboot you are using.

I'm using your manufacturing build's U-Boot. Please look at thread https://community.onion.io/topic/56/omega-doesn-t-to-appear-to-be-working and you'll see I have the same U-Boot as the other guy and it was advised to him that he had the manufacturing build of the OS and U-Boot on his device, same as mine. All I'm asking for is instructions to flash the device over from the manufacturing TEST BUILD to the current official build, there must be a way to do it, otherwise how could you have flashed all those devices before shipping them out?

@Boken-Lin said:

@Andrew-Donnelly I can confirm that if you have a stable firmware compiled for the Omega, you can just write it at 0x20000. That's what's typically done by the httpd server within uboot anyways.

So the latest build on the repo server, I should be able to copy into memory from tftp, and then write out to 0x20000 and i should be able to get this up and online, correct?

I tried the following: I downloaded the latest build from repo, v0.0.4-b216.bin to my tftp server and renamed to 3700A8C0.img (the IP address hex backwards (little-endian)).

ar7240> setenv ipaddr 192.168.0.55
ar7240> setenv serverip 192.168.0.1
ar7240> ping 192.168.0.1
Using eth0 device
host 192.168.0.1 is alive
ar7240> tftpboot
*** Warning: no boot file name; using '3700A8C0.img'
Using eth0 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.55
Filename '3700A8C0.img'.
Load address: 0x81000000
Loading: *
TFTP error: 'File not found' (1)
Starting again

eth1 link down
FAIL
*** Warning: no boot file name; using '3700A8C0.img'
Using eth0 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.55
Filename '3700A8C0.img'.
Load address: 0x81000000
Loading: T
TFTP error: 'File not found' (1)
Starting again

eth1 link down
FAIL
*** Warning: no boot file name; using '3700A8C0.img'
Using eth0 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.55
Filename '3700A8C0.img'.
Load address: 0x81000000
Loading: T #T #########################################################################
         #
         #########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         #
         #########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         #
         #########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         #
         #########################################################################
         ###########################################################################
         ##########################################################################
         ##########################################################################
         ###########################################################################
         ########################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #######################################################
done
Bytes transferred = 16252928 (f80000 hex)
ar7240> md 81000000
81000000: 01000000 4f70656e 57727400 00000000    ....OpenWrt.....
81000010: 00000000 00000000 00000000 72343734    ............r474
81000020: 30300000 00000000 00000000 00000000    00..............
81000030: 00000000 00000000 00000000 00000000    ................
81000040: 04700001 00000001 00000000 6c30ff2c    .p..........l0.,
81000050: cfe8e07f a262e471 ed1a85a0 00000000    .....b.q........
81000060: 00000000 00000000 00000000 00000000    ................
81000070: 00000000 80060000 80060000 00f80000    ................
81000080: 00000200 00116268 00100000 005f602a    ......bh....._`*
81000090: 00000000 00000000 00000000 00000000    ................
810000a0: 00000000 00000000 00000000 00000000    ................
810000b0: 00000000 00000000 00000000 00000000    ................
810000c0: 00000000 00000000 00000000 00000000    ................
810000d0: 00000000 00000000 00000000 00000000    ................
810000e0: 00000000 00000000 00000000 00000000    ................
810000f0: 00000000 00000000 00000000 00000000    ................

ar7240> cp 0x81000000 0x20000 0xf80000
ar7240> reset
Unknown command 'reset' - try 'help'
ar7240>

U-Boot 1.1.4 (Aug 28 2015 - 16:51:26)

AP121 (ar9331) U-boot

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 140k for U-Boot at: 83fdc000
Reserving 192k for malloc() at: 83fac000
Reserving 44 Bytes for Board Info at: 83fabfd4
Reserving 36 Bytes for Global Data at: 83fabfb0
Reserving 128k for boot params() at: 83f8bfb0
Stack Pointer at: 83f8bf98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16777216, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot:  0
## Booting image at 9f300000 ...
Bad Magic Number

@Theodore-Borromeo said:

@Andrew-Donnelly what is the format it requires? I'm pretty sure tftpboot can accept a bin, uImage or ELF executable. The biggest issue, I would think, is figuring out the hex offset that said images/binaries would need to be flashed at. . . @Boken-Lin can probably assist in that via contact with the manufacturers or a priori knowledge of the platform's memory layout

I got that far, but when I flashed the U-Boot was still looking in the wrong location and throws bad magic number when I try to boot from that location. I want to quickly confirm with devs if the firmware image that I listed on this post is indeed cleared to be flashed to this hardware, and if so, just start writing it at 20000?

I work on the hardware and OS sides of the equipment, I don't normally do programming other than flashing systems from boot. We use a modified version of U-Boot at work too with some extra tools built in, the httpd server is a great public alternative to what we have baked into ours.

@Boken-Lin Not from this format, I'm going to dig into the new firmware file's structure and see if I can't find the updated version of U-Boot and extract it, I figure if I can get that to load over tftpboot, then I could possibly trigger the httpd from that and upgrade.

Update: I tried extracting the U-Boot from the working Omega and tftpbooting that on the bricked one, and no dice, "Bad Magic Number" same as the rest of my attempts.

@Theodore-Borromeo There is a tftpboot option, though it requires a different format than the BIN file we're given for firmware updates.

@Lazar-Demin I think you misunderstood. I'm not getting httpd in U-Boot, I'm getting httpd in the pre-release firmware that I posted a snapshot of the output of. If you read line by line my 2 console outputs, you'll see which httpd server I'm starting. I'm already booted into the pre-release bench-test linux before I can run it. Please read the output I provide you, again, I work on this kinda stuff for a living, so the output I give you should be useful, make use of it or it's for naught.

@Lazar-Demin said:

@Andrew-Donnelly you're able to get httpd running with the Ethernet Expansion?

Download the latest firmware from: http://repo.onion.io/omega/images/omega-v0.0.3-b213.bin
Use that to reflash your Omega.

I will say this, that filename is super helpful, since now I think I can tftpboot off that and manually push the firmware by invoking an upgrade from the console! And U-Boot refuses to directly load that firmware update file, dang.

I have a question, can I use dd to flash this .bin file to the "DOA" Omega? I mean I can get into the pre-release environment, I can get on the network without issue, heck, it looks like there's enough facilities here to pull the image across the network to load it, so what say you and your team? /dev/mtd2 ?

Well I've been playing around and trying to get this thing flashed. I'm still able to get into U-Boot so provided a bootable tftpboot image can be made available, I can quickly write up instructions on how to recover the device from scratch if needed.

@Kit-Bishop said:

e

Thanks for the try, it's just frustrating because out of the 2 I've opened, 1 is basically DOA, and there's nothing I can do until I get a TFTP-loadable version that I can run oupgrade on to reflash the device. I work with this kind of stuff every day at work, and we have something similar called netflash, but again, we produce the devices, so we have the firmware and TFTP servers everywhere.

Some good news, I can at least get httpd running on the pre-release, but because there's no files, I'm immediately returned a 404. Hah.

@Kit-Bishop It does not exist.

I also found this guide on another thread:

@Boken-Lin said:

@Daniel-Anner I don't have the guide written yet. We will make sure we do that next week.

For the time being, here is a short guide:

1. Ensure that the Expansion dock is in the OFF position
2. Plug ethernet expansion to the expansion dock
3. Connect your computer to the Omega with the ethernet expansion via ethernet cable
4. Connect the micro USB cable to the Expansion Dock
5. Start serial terminal
6. Switch the Expansion dock to ON position
7. At this point you will see some text appear in your serial terminal IMMEDIATELY PRESS ANY KEY ON YOUR COMPUTER. This will interrupt the normal booting sequence and put you into the uboot.
8. Type httpd to start the httpd service in uboot. A message should tell you that a server is hosted in 192.168.1.1.
9. Open up the browser on your computer, and navigate to http://192.168.1.1, here you will see an interface that allows you to upload and re-flash the firmware.

This guide is not complete. There is no "httpd" on the bootloader I have (same as the other guy here, pre-release build on this Omega, it also had 2 bent pins). The u-boot does include tftpboot so if there was an image I could throw onto my local TFTP server, I could boot this thing off the network and get the oupgrade command.

Here's my Omega's output thus far:

U-Boot 1.1.4 (Aug 28 2015 - 16:51:26)

AP121 (ar9331) U-boot

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 140k for U-Boot at: 83fdc000
Reserving 192k for malloc() at: 83fac000
Reserving 44 Bytes for Board Info at: 83fabfd4
Reserving 36 Bytes for Global Data at: 83fabfb0
Reserving 128k for boot params() at: 83f8bfb0
Stack Pointer at: 83f8bf98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16777216, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot:  0
ar7240> help
reset   - Perform RESET of the CPU
?       - alias for 'help'
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
cp      - memory copy
erase   - erase FLASH memory
help    - print online help
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
progmac - Set ethernet MAC addresses
run     - run commands in an environment variable
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
ar7240> printenv
bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),13184k(uImage),64k(NVRAM),64k(ART)
bootcmd=bootm 0x9f300000
bootdelay=4
baudrate=115200
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee
ipaddr=192.168.1.2
serverip=192.168.1.10
stdin=serial
stdout=serial
stderr=serial
ethact=eth0

Environment size: 361/65532 bytes
ar7240> setenv ipaddr 192.168.0.60
ar7240> setenv serverip 192.168.0.1
ar7240> ping 192.168.0.1
dup 1 speed 100
Using eth0 device
host 192.168.0.1 is alive
ar7240>

It's on the local network now through the Ethernet Expansion, and I have a local TFTP server on my router (pfSense), but I have no bootable image, the image on the Omega currently is the same one that the other guy in this thread posted, it's the pre-release bench test version. I need an official bootable version I can dump on TFTP or else this thing is useless. Oupgrade does not exist in the loaded firmware, and httpd does not work on this bootloader:

ar7240> ping 192.168.0.1
dup 1 speed 100
Using eth0 device
host 192.168.0.1 is alive
ar7240> httpd
Unknown command 'httpd' - try 'help'
ar7240> boot
## Booting image at 9f300000 ...
   Image Name:   Linux Kernel Image
   Created:      2015-08-28   8:51:30 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    772146 Bytes = 754 kB
   Load Address: 80002000
   Entry Point:  8019bd60
   Verifying Checksum at 0x9f300040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8019bd60) ...
## Giving linux memsize in bytes, 67108864

Starting kernel ...

Booting AR9330(Hornet)...
Linux version 2.6.31--LSDK-9.2.0_U11.14 (dingyongtian@localhost.localdomain) (gcc version 4.3.3 (GCC) ) #6 Fri Aug 28 16:51:14 CST 2015
flash_size passed from bootloader = 16
arg 1: console=ttyS0,115200
arg 2: root=31:02
arg 3: rootfstype=squashfs
arg 4: init=/sbin/init
arg 5: mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),13184k(uImage),64k(NVRAM),64k(ART)
arg 6: mem=64M
CPU revision is: 00019374 (MIPS 24Kc)
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),13184k(uImage),64k(NVRAM),64k(ART) mem=64M
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 62632k/65536k available (1652k kernel code, 2832k reserved, 420k data, 112k init, 0k highmem)
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 266.24 BogoMIPS (lpj=532480)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
===== ar7240_platform_init: 0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
AR7240 GPIOC major 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 122
io scheduler noop registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
ttyS0: detected caps 00000000 should be 00000100
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
6 cmdlinepart partitions found on MTD device ar7240-nor0
Creating 6 MTD partitions on "ar7240-nor0":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000050000 : "u-boot-env"
0x000000050000-0x000000300000 : "rootfs"
0x000000300000-0x000000fe0000 : "uImage"
0x000000fe0000-0x000000ff0000 : "NVRAM"
0x000000ff0000-0x000001000000 : "ART"
usbmon: debugfs is not available
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
arch/mips/ar7240/gpio.c (ar7240_simple_config_init) AP_RESET_GPIO: 22
arch/mips/ar7240/gpio.c (ar7240_simple_config_init) JUMPSTART_GPIO: 11
ar7240wdt_init: Registering WDT success
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 112k freed
init started:  BusyBox v1.01 (2015.08.28-08:51+0000) multi-call binary
init started:  BusyBox v1.01 (2015.08.28-08:51+0000) multi-call binary
Starting pid 20, console /dev/ttyS0: '/etc/rc.d/rcS'
ATHR_GMAC: Length per segment 1536
ATHR_GMAC: fifo cfg 3 01f00140
ATHR_GMAC: Mac address for unit 0:bf3f0000
ATHR_GMAC: ff:ff:ff:ff:ff:ff
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   252
ATHR_GMAC: Mac capability flags    :   4403
ATHR_GMAC: Mac address for unit 1:bf3f0006
ATHR_GMAC: ff:ff:ff:ff:ff:ff
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   96
ATHR_GMAC: Mac capability flags    :   4D83
athr_gmac_ring_alloc Allocated 640 at 0x838ca800
athr_gmac_ring_alloc Allocated 4032 at 0x838a9000
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
ATHR_GMAC: Enet Unit:0 PHY:4 is UP Mii 100Mbps full duplex
ATHR_GMAC: done cfg2 0x7115 ifctl 0x10000 miictrl
Setting Drop CRC Errors, Pause Frames and Length Error frames
athr_gmac_ring_alloc Allocated 640 at 0x838ca400
athr_gmac_ring_alloc Allocated 1536 at 0x83966000
ATHRS26: resetting s26
ATHRS26: s26 reset done
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 1(eth0) entering forwarding state
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Port Status 1c000004
ar7240-ehci ar7240-ehci.0: ATH EHCI
ar7240-ehci ar7240-ehci.0: new USB bus registered, assigned bus number 1
ehci_reset Intialize USB CONTROLLER in host mode: 3
ehci_reset Port Status 1c000000
ar7240-ehci ar7240-ehci.0: irq 3, io mem 0x1b000000
ehci_reset Intialize USB CONTROLLER in host mode: 3
ehci_reset Port Status 1c000000
ar7240-ehci ar7240-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: ATH EHCI
usb usb1: Manufacturer: Linux 2.6.31--LSDK-9.2.0_U11.14 ehci_hcd
usb usb1: SerialNumber: platform
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
**** drop_caches_sysctl_handler: all done timer added ...****
Starting pid 218, console /dev/t
 (none) mips #6 Fri Aug 28 16:51:14 CST 2015 (none)
(none) login: root
Password:
Jan  1 00:00:35 login[218]: root login  on `ttyS0'



BusyBox v1.01 (2015.08.28-08:51+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # oupgrade
-sh: oupgrade: not found
~ #

I too have an Omega that does not boot up properly. The password provided here "5up" worked to log in, but now I need to flash the latest version of the firmware on it, where can I get this and the instructions on how to do so? Also, worrisome is the fact that during boot, the Atheros came up with MAC address FF:FF:FF:FF:FF:FF, is there NVRAM I have to address as well? HALP.