Posts made by cosmonaut2919

@crispyoz Thank you, I will do this now

I am trying to build the cross compiler for the Onion Omega2+. I keep getting this error when running the make after following the make menuconfig instructions.

/usr/include/asm-generic/int-ll64.h:31:42: error: conflicting types for '__u64'
   31 | __extension__ typedef unsigned long long __u64;
      |                                          ^~~~~

I found a guide online with a patch file but that didn't work. Not sure if I did it wrong. Here is the link: https://github.com/ericpaulbishop/gargoyle/issues/832

I was able to fix it. I didn't even think about my /etc/config/fstab. I had anon_mount off. With it on I can now use my USB

@crispyoz

Bus 001 Device 003: ID 2c7c:0125 Quectel EC25-AF
Bus 002 Device 001: ID 1d6b:0001 Linux 5.10.161 ohci_hcd Generic Platform OHCI controller
Bus 001 Device 005: ID abcd:1234 General  UDisk
Bus 001 Device 002: ID 05e3:0608  USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux 5.10.161 ehci_hcd EHCI Host Controller

@crispyoz This is my lsmod output.

autofs4                19936  1
cdc_acm                15696  0
cdc_wdm                 8480  2 qmi_wwan
cfg80211              285840  3 mt7603e,mt76,mac80211
chacha_mips             5344  1 libchacha20poly1305
cmac                    2464  0
compat                  1024  2 mac80211,cfg80211
cp210x                 14272  0
crc_ccitt               1664  1 ppp_async
crc16                   1024  1 ext4
crc32c_generic          1376  3
drbg                   17536  0
ehci_fsl                3456  0
ehci_hcd               38064  2 ehci_platform,ehci_fsl
ehci_platform           4608  0
ext4                  440000  1
fat                    58192  1 vfat
fsl_mph_dr_of           3632  0
gpio_button_hotplug     6592  0
hmac                    2496  0
i2c_core               26480  2 i2c_mt7621,i2c_dev
i2c_dev                 5200  0
i2c_mt7621              2912  0
ip6_udp_tunnel          1696  1 wireguard
jbd2                   56336  1 ext4
jitterentropy_rng       7136  0
kpp                      896  0
leds_gpio               3168  0
libchacha20poly1305     4320  1 wireguard,[permanent]
libcrc32c                592  1 nf_tables
libcurve25519_generic   10464  1 wireguard
libsha256               8576  1 sha256_generic
mac80211              521824  2 mt7603e,mt76
mbcache                 3216  1 ext4
mii                     5152  1 usbnet
mmc_block              27152  2
mmc_core               88480  3 mmc_block,sdhci,mtk_sd
mt76                   44448  1 mt7603e
mt7603e                38432  0
mtk_sd                 15408  0
nf_conntrack           69200  7 nft_redir,nft_nat,nft_masq,nft_flow_offload,nft_ct,nf_nat,nf_flow_table
nf_defrag_ipv4          1216  1 nf_conntrack
nf_defrag_ipv6          5584  1 nf_conntrack
nf_flow_table          22128  4 nf_flow_table_ipv6,nf_flow_table_ipv4,nf_flow_table_inet,nft_flow_offload
nf_flow_table_inet       576  0
nf_flow_table_ipv4       448  0
nf_flow_table_ipv6       448  0
nf_log_common           2976  2 nf_log_ipv6,nf_log_ipv4
nf_log_ipv4             3680  0
nf_log_ipv6             3968  0
nf_nat                 22384  4 nft_redir,nft_nat,nft_masq,nft_chain_nat
nf_reject_ipv4          2528  2 nft_reject_ipv4,nft_reject_inet
nf_reject_ipv6          2944  2 nft_reject_ipv6,nft_reject_inet
nf_tables             150992190 nft_fib_inet,nf_flow_table_ipv6,nf_flow_table_ipv4,nf_flow_table_inet,nft_reject_ipv6,nft_reject_ipv4,nft_reject_inet,nft_reject,nft_redir,nft_quota,nft_objref,nft_numgen,nft_nat,nft_masq,nft_log,nft_limit,nft_hash,nft_flow_offload,nft_fib_ipv6,nft_fib_ipv4,nft_fib,nft_ct,nft_counter,nft_chain_nat
nfnetlink               5184  1 nf_tables
nft_chain_nat            864  2
nft_counter             1792 15
nft_ct                  7680  3
nft_fib                 1408  3 nft_fib_inet,nft_fib_ipv6,nft_fib_ipv4
nft_fib_inet             672  0
nft_fib_ipv4            2080  1 nft_fib_inet
nft_fib_ipv6            2784  1 nft_fib_inet
nft_flow_offload        3488  0
nft_hash                2432  0
nft_limit               3584  5
nft_log                 1728  0
nft_masq                1824  1
nft_nat                 2592  0
nft_numgen              1504  0
nft_objref              1664  0
nft_quota               2016  0
nft_redir               1792  0
nft_reject              1152  3 nft_reject_ipv6,nft_reject_ipv4,nft_reject_inet
nft_reject_inet         1152  2
nft_reject_ipv4          672  0
nft_reject_ipv6          672  0
nls_base                4928  6 vfat,fat,nls_utf8,nls_iso8859_1,nls_cp437,usbcore
nls_cp437               4416  0
nls_iso8859_1           2880  0
nls_utf8                 864  0
ohci_hcd               25744  1 ohci_platform
ohci_platform           3424  0
option                 33760  0
poly1305_mips           3424  1 libchacha20poly1305
ppp_async               7136  0
ppp_generic            24880  3 pppoe,ppp_async,pppox
pppoe                   9600  0
pppox                   1296  1 pppoe
qmi_wwan               16704  0
scsi_mod               88272  2 usb_storage,sd_mod
sd_mod                 30160  0
sdhci                  34448  1 sdhci_pltfm
sdhci_pltfm             2368  0
seqiv                   1600  0
sha256_generic          2400  0
slhc                    5312  1 ppp_generic
spidev                  6960  0
udp_tunnel             10640  1 wireguard
usb_common              3184  3 ohci_hcd,ehci_platform,usbcore
usb_storage            43280  0
usb_wwan                4480  1 option
usbcore               145760 15 option,usb_wwan,qmi_wwan,cp210x,usbserial,usbnet,cdc_wdm,cdc_acm,usb_storage,ohci_platform,ohci_hcd,ehci_platform,ehci_fsl,ehci_hcd
usbnet                 17296  1 qmi_wwan
usbserial              17872  3 option,usb_wwan,cp210x
vfat                    9696  0
wireguard              52336  0

@Lazar-Demin Sorry about the late reply I have been away for a bit and missed your response. Here is my dmesg output. Removing the USB did not freeze my onion and I can still access it

[  510.066127] rt3050-esw 10110000.esw: port 0 link down
[ 1861.049340] usb 1-1.1: new high-speed USB device number 4 using ehci-platform
[ 1861.204647] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 1861.228862] scsi host0: usb-storage 1-1.1:1.0
[ 1862.260485] scsi 0:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
[ 1862.307718] sd 0:0:0:0: [sda] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 1862.341522] sd 0:0:0:0: [sda] Write Protect is off
[ 1862.346414] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 1862.356579] sd 0:0:0:0: [sda] No Caching mode page found
[ 1862.362078] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1862.414973]  sda:
[ 1862.424476] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2022.294838] usb 1-1.1: USB disconnect, device number 4

@Lazar-Demin I was able to get around the need of a USB by using ftp through wireguard that I have set up. I can still send you the logs if you want if it will help with development and production of 22.03

@Lazar-Demin I do not. Which is weird because I do see those logs on my Onion that has OpenWRT 18. I got around this by simply using ftp but I would like to be able to use the usb on my expansion dock so where should I start debugging?

I am trying to access files from my USB on my Onion Omega2+ using the expansion dock. I have installed the new beta firmware but when I check /mnt my microsd card appears but not my USB. I have ckecked and I believe I have all the necesary kmods: ehci-platform, ohci-platform, usbcore, and usb-storage. I am unsure of what config I need to modify or if there are some packages or modules I am missing. Any help would be greatly appreciated

@Lazar-Demin I can't upload files to the Onion anymore. I'm not sure if its a setting I got to change but I can't access it through WinSCP or rsync anymore. What do I need to change to fix this?

@huntc Sorry to bother you again but I figured my issue with wg-quick (I think). Have you ever been able to install packages such as node or node-npm with your custom image?

@huntc It is now working and I am able to ssh into the Onion. How did you set up your wireguard client? Because the command "wg-quick" which I had normally used when setting up wireguard is not recognized

@huntc I flashed in your sysupgrade and now The onion wont appear on my wifi and I can't ssh into it. This ever happened to you?

@huntc The wg-quick command has not been working for me. This happened with another downloadable command for a different package I installed but I fixed it by adding it to my file path. I can't find the path to wg-quick after running which wg-quick and find / -iname wg-quick. Did wg-quick fail to dowlnoad?

@huntc Thank you! Much appreciated

I am attempting to use my Onion Omega2+ as a client for a Wireguard VPN server that I am setting. I have installed wireguard/wireguard-tols and can use wg to generate private and public keys as well. I was trying to follow OpenWRT's guide to set up a client on Wireguard but I am confused as to where to set the configuration parameters since there is no wiregard or wg0.conf file on my Onion. Any help would be greatly appreciated and the guide is question can be found here: https://openwrt.org/docs/guide-user/services/vpn/wireguard/client

@huntc Were you able to successfully use the onion as your WireGuard client? I am currently trying to do that but I am quite lost and could use some help. I have wireguard and the kernel modules installed and wg works. How were you able to set it up? I have previously set up wireguard in ubuntu for both server and client. Any help would be much appreciated

I have opened an http server using a simple python command on my Onion Omega2+ (python3 -m http.server 300). When running this on my computer I am able to access the new http server on localhost:3000. How can I access it from my Onion and/or my computer when opening the http server on my Onion. The big picture here is I will open up a server on my computer using that same pythonn3 command, open a websocket tunnel and be able to access the server through the onion when I access the WS tunnel through it but for now I just want to connect to the port that I am opening.

@Lazar-Demin If i am not mistaken from the package-lock.json file it has a minimum node requirement of 10.12. Is there a way to update the node on the Onion to that? I tried installing NVM but even after getting it in the onion the command was never recognized

@Lazar-Demin Even after following the instructions for node packages that need compiling, I still get the same error message when trying to run node --max_old_space_size=512 $(which npm) install wstunnel. Any other possible solutions or suggestions?