Hello!
I have same issue with connecting Omega2+ to my Mikrotik router. I'm from Russia, so I'm not using channels 12, 13 and so on.
FW Version 0.1.7 b140
Here is the output from Omega2:
wifisetup scan
root@Omega-B8B3:/# wifisetup
Onion Omega Wifi Setup
Select from the following:
1) Scan for Wifi networks
2) Type network info
q) Exit
Selection: 1
Scanning for wifi networks...
Select Wifi network:
1) Home
2) Why-Fi
3) TP_New
4) MGTS_GPON_9615
5) MY_dlink_wi-fi
6) 2kom-234
7) Tenda_067638
wifisetup list
oot@Omega-B8B3:/# wifisetup list
{
"results": [
{
"ssid": "Why-Fi",
"encryption": "WPA2PSK",
"password": "PASSWORD"
}
]
}
uci show wireless
root@Omega-B8B3:/# uci show wireless
wireless.ra0=wifi-device
wireless.ra0.type='ralink'
wireless.ra0.mode='9'
wireless.ra0.channel='auto'
wireless.ra0.txpower='100'
wireless.ra0.ht='20'
wireless.ra0.country='RU'
wireless.ra0.countryregion='1'
wireless.ra0.disabled='0'
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device='ra0'
wireless.@wifi-iface[0].network='wlan'
wireless.@wifi-iface[0].mode='ap'
wireless.@wifi-iface[0].encryption='psk2'
wireless.@wifi-iface[0].key='12345678'
wireless.@wifi-iface[0].ApCliAuthMode='WPA2PSK'
wireless.@wifi-iface[0].ApCliEncrypType='AES'
wireless.@wifi-iface[0].ssid='Omega-B8B3'
wireless.@wifi-iface[0].ApCliSsid='Why-Fi'
wireless.@wifi-iface[0].ApCliPassWord='PASSWORD'
wireless.@wifi-iface[0].ApCliEnable='0'
wireless.@wifi-config[0]=wifi-config
wireless.@wifi-config[0].ssid='Why-Fi'
wireless.@wifi-config[0].encryption='WPA2PSK'
wireless.@wifi-config[0].key='PASSWORD'
uci show network
root@Omega-B8B3:/# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd1d:48c4:7633::/48'
network.wlan=interface
network.wlan.type='bridge'
network.wlan.ifname='eth0.1'
network.wlan.proto='static'
network.wlan.ipaddr='192.168.3.1'
network.wlan.netmask='255.255.255.0'
network.wlan.ip6assign='60'
network.wan=interface
network.wan.ifname='eth0'
network.wan.proto='dhcp'
network.wwan=interface
network.wwan.ifname='apcli0'
network.wwan.proto='dhcp'
cat /etc/config/wireless
root@Omega-B8B3:/# cat /etc/config/wireless
config wifi-device 'ra0'
option type 'ralink'
option mode '9'
option channel 'auto'
option txpower '100'
option ht '20'
option country 'RU'
option countryregion '1'
option disabled '0'
config wifi-iface
option device 'ra0'
option network 'wlan'
option mode 'ap'
option encryption 'psk2'
option key '12345678'
option ApCliAuthMode 'WPA2PSK'
option ApCliEncrypType 'AES'
option ssid 'Omega-B8B3'
option ApCliSsid 'Why-Fi'
option ApCliPassWord 'PASSWORD'
option ApCliEnable '0'
config wifi-config
option ssid 'Why-Fi'
option encryption 'WPA2PSK'
option key 'PASSWORD'