Posts made by Diego Sueiro

@Alex-Thow ,

Changing option mode '9' to option mode 'sta' lets the option ApCliEnable '1' to persist across reboots.

@luz , my response was for @Peter-Hatina.

I'm sorry if was not clear.

I'm currently adding support for Omega2 in Yocto and I already managed to get the Linux kernel (4.9.37) compiled applying LEDE specific implementations and patches and rampis patches. But I haven't tested it yet.

And now I just realized that it seems that there is no u-boot source code available. Do you know anything about this?

Any news about the Omega2+ u-boot source code?

@Alex-Thow, I can confirm that this is happening to me in the Omega2+ 0.1.10 b160.

This is what I did to get my Omega2p (0.1.5 b130) working with SKY Q Hub using WPA2PSK/AES in UK.

Basically, after configuring the wireless connection with the wifisetup tool (from serial console) I needed to edit the /etc/config/wireless and set the country to UK and ApCliEnable to 1.

config wifi-device 'ra0'
        option type 'ralink'
        option mode '9'
        option channel 'auto'
        option txpower '100'
        option ht '20'
        option country 'UK'
        option disabled '0'

config wifi-iface
        option device 'ra0'
        option network 'wlan'
        option mode 'ap'
        option encryption 'psk2'
        option key '12345678'
        option ssid 'Omega-XXXX'
        option ApCliSsid 'SKYFECB3'
        option ApCliPassWord 'XXX'
        option ApCliEncrypType 'AES'
        option ApCliAuthMode 'WPA2PSK'
        option ApCliEnable '1'

config wifi-config
        option ssid 'SKYFECB3'
        option encryption 'WPA2PSK'
        option key 'XXX'

But every reboot I need to set ApCliEnable to 1 after I uploaded to "0.1.10 b160" version. And sometimes the wifi connects, sometimes not. Maybe I'll downgrade to "0.1.5 b130" version.

It is incredible how buggy is this device.

Sorry, but saying that Yocto is not suitable for resource constraint devices is not true.

Yocto is a tool to create embedded custom linux distributions. You can create images with sizes lower than 1MB (rootfs only) to a complete Tizen system.

Some references:
[https://wiki.yoctoproject.org/wiki/Projects/Poky-Tiny](link url)
[https://sergioprado.org/resultado-do-desafio-gerando-distribuicoes-linux-com-o-yocto-project/](link url)
[https://wiki.tizen.org/Build_Tizen_with_Yocto_Project](link url)