Posts made by ekt2018

@Lazar-Demin

How can I put an Omega2+ into test mode for RF certification purposes?

I understand that at least I will have to install a special image.

How can I have this image?

@Lazar-Demin

Can you help us?

Hi, @WILLIAM SCOTT

ANATEL demands every RF emitting product to be tested and certified regardless of existing FCC certification.

So I intend to apply for ANATEL certification of my product which contains an O2 inside.

It's basically emission tests.

All I need is a tool to exercise O2 to provide continuous emissions in order to be measured at the RF lab so it can be checked and verified to be OK.

I have applied for certifying other Wi-Fi and BT modules. Usually they require a special firmware and an application software to send certification-specific commands.

I couldn't find a channel to request that items directly from Omega since they direct all tech requests to this forum afaik.

Do you know somebody at Omega to talk about the matter?

Hi,

Any clue about the RF certification matter?

All I need are the files and/or application needed to exercise the continuous emission tests.

Hi,

How can I find files and instructions to guide an ANATEL certification test for Omega 2+?

The setup is similar to FCC, so the same resources are supposed to work.

Thanks.