@Josh-Rosenthal said:
did you use the beta USB to serial drivers?
@Josh-Rosenthal Thx, I did not know existed that driver, I've tried with that driver,(but nothing)
but to discart any conflict problem I tested drivers in the laptop of my father (Windows 7), but still with the same problem, the yellow light dont blink=
https://youtu.be/FIRsPDyMoyg
(already tested with both docks)
Yes , my address still the same ,
(if is not very expensive, I can send you back the broken)
(give me the adress to ask at the post office)
@Vitalii-Topoliuk , if I connect my phone and can transfer files.
that means that has data transfer, not?
@Boken-Lin
im already tried, but the same = https://www.youtube.com/watch?v=CFWO8A6KwEs
I also tested on another computer with both docks, and 3 diferents cables.
@SDuquet said:
Do you have the Ethernet extension?
Only the mini dock, and expansion dock .
I'll have my fingers crossed for the @Boken-Lin answer
thx
following the @SDuquet steps=
https://www.youtube.com/watch?v=itx5BcA45W4 (sry for Vertical video)
after that I tried with the mini dock , and with another cable=
https://www.youtube.com/watch?v=tO-3YDz1OVc (sry for Vertical video)
but the yellow light don't blink , just stay on lower.
@SDuquet said:
I didn't even have the pins set in all the way. When you push it together, you feel like you're pressing to hard then, with just a little more, it sinks in nicely.
Thx, I could push a bit more (and reset, unplug and plug again the omega ,unplug and plug again the power) ) ,
I saw your post (https://community.onion.io/topic/229/omega-arrived/12)
but still continued with the same problem,
I already update the Photos, on the url (https://drive.google.com/folderview?id=0B_Edld75CW9ES0Nwb0hfd3pOVnM&usp=sharing)
I hope I do not get many laughs if it was just that 
more photos = !https://drive.google.com/folderview?id=0B_Edld75CW9ES0Nwb0hfd3pOVnM&usp=sharing
you see anything wrong?
thx!
the yellow light all the time stays on, but very low.
I tried to restore the factory as Internet routers, leaving pressed the reset button (before starting up) and keeping it, but still the same.
