Topics created by Hong Chen

@luz you are right of course! I was trying for hours to setup arduino-dock (v.1) on my Omega2+ and getting that same error. Mistyped it without the spaces and that error disappeared. As expected arduino-dock still did not work

Sorry for replay late, I try to debrick , because I am quite busy and try many time but still not work. it seem hardware not stable. see following describe. any thing wrong? (btw, I backed 2 Omega2, hope go smoothly!) Usually only show following message then freeze. ********************************************* * U-Boot 1.1.4 (Sep 14 2015, 08:21:31) * ********************************************* AP121 (AR9331) U-Boot for Onion Omega DRAM: 64 MB DDR2 16-bit id read ox100000ff FLASH: 16MCLOCKS: 400/400/200/20 MHz (CPU/RAM/AHB/SPI) LED on during eth initialization... (freeze) -------------- May be one time go through after many try, then freeze after starting httpd... ********************************************* * U-Boot 1.1.4 (Sep 14 2015, 08:21:31) * ********************************************* AP121 (AR9331) U-Boot for Onion Omega DRAM: 64 MB DDR2 16-bit id read ox100000ff FLASH: 16MCLOCKS: 400/400/200/20 MHz (CPU/RAM/AHB/SPI) LED on during eth initialization... Hit any key to stop autobooting: 0 Omega> httpd Ethernet mode (duplex/speed): 1/100 Mbps HTTP server is starting at IP: 192.168.1.1 (freeze) -------------- I am give up!