@Lazar-Demin Hi, my need is to connect my phone/my laptop etc to my onion wifi and not to connect my onion to wifi .
IBH
@IBH
Best posts made by IBH
Latest posts made by IBH
-
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
-
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@Lazar-Demin I'm not using onion openwrt , I prefer keep using openwrt base and I need to have the .config file I don't know why @crispyoz 's build image worked fine and not mine .
-
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@crispyoz @Lazar-Demin Hi both , I'm really disappointed, it doesn't work:
network file:root@OpenWrt:/# cat /etc/init.d/network #!/bin/sh /etc/rc.common START=20 STOP=90 USE_PROCD=1 init_switch() { setup_switch() { return 0; } include /lib/network setup_switch } start_service() { init_switch procd_open_instance procd_set_param command /sbin/netifd procd_set_param respawn procd_set_param watch network.interface [ -e /proc/sys/kernel/core_pattern ] && { procd_set_param limits core="unlimited" } procd_close_instance } reload_service() { local rv=0 init_switch ubus call network reload || rv=1 /sbin/wifi reload_legacy return $rv } stop_service() { /sbin/wifi down ifdown -a sleep 1 } validate_atm_bridge_section() { uci_validate_section network "atm-bridge" "${1}" \ 'unit:uinteger:0' \ 'vci:range(32, 65535):35' \ 'vpi:range(0, 255):8' \ 'atmdev:uinteger:0' \ 'encaps:or("llc", "vc"):llc' \ 'payload:or("bridged", "routed"):bridged' } validate_route_section() { uci_validate_section network route "${1}" \ 'interface:string' \ 'target:cidr4' \ 'netmask:netmask4' \ 'gateway:ip4addr' \ 'metric:uinteger' \ 'mtu:uinteger' \ 'table:or(range(0,65535),string)' } validate_route6_section() { uci_validate_section network route6 "${1}" \ 'interface:string' \ 'target:cidr6' \ 'gateway:ip6addr' \ 'metric:uinteger' \ 'mtu:uinteger' \ 'table:or(range(0,65535),string)' } validate_rule_section() { uci_validate_section network rule "${1}" \ 'in:string' \ 'out:string' \ 'src:cidr4' \ 'dest:cidr4' \ 'tos:range(0,31)' \ 'mark:string' \ 'invert:bool' \ 'lookup:or(range(0,65535),string)' \ 'goto:range(0,65535)' \ 'action:or("prohibit", "unreachable", "blackhole", "throw")' } validate_rule6_section() { uci_validate_section network rule6 "${1}" \ 'in:string' \ 'out:string' \ 'src:cidr6' \ 'dest:cidr6' \ 'tos:range(0,31)' \ 'mark:string' \ 'invert:bool' \ 'lookup:or(range(0,65535),string)' \ 'goto:range(0,65535)' \ 'action:or("prohibit", "unreachable", "blackhole", "throw")' } validate_switch_section() { uci_validate_section network switch "${1}" \ 'name:string' \ 'enable:bool' \ 'enable_vlan:bool' \ 'reset:bool' \ 'ar8xxx_mib_poll_interval:uinteger' \ 'ar8xxx_mib_type:range(0,1)' } validate_switch_vlan() { uci_validate_section network switch_vlan "${1}" \ 'device:string' \ 'vlan:uinteger' \ 'ports:list(ports)' } service_triggers() { procd_add_reload_trigger network wireless procd_open_validate validate_atm_bridge_section validate_route_section [ -e /proc/sys/net/ipv6 ] && validate_route6_section validate_rule_section [ -e /proc/sys/net/ipv6 ] && validate_rule6_section validate_switch_section validate_switch_vlan procd_close_validate } shutdown() { ifdown -a sleep 1 }
Could you please share the config file you've used for your openwrt 22.03 ?
Could you please this network file maybe I've missed something here? -
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@Lazar-Demin @crispyoz thanks both. I got this after doings your steps:
scripts/config/conf: /lib/x86_64-linux-gnu/libc.so.6: versionGLIBC_2.33' not found (required by scripts/config/conf) scripts/config/conf: /lib/x86_64-linux-gnu/libc.so.6: version
GLIBC_2.34' not found (required by scripts/config/conf)
/home/ibh/projects/onion-22-03/sources/openwrt-22/include/toplevel.mk:118: recipe for target 'defconfig' failed
make: *** [defconfig] Error 1
FYI: I'm using docker for building. -
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@crispyoz Do you have a GitHub repo where you've pushed your OpenWrt 22.03 clone with your config changes?
In fact, If I'm not wrong you git clone the base OpenWrt 22.03 (https://git.openwrt.org/openwrt/openwrt.git)then you've added your feeds and configs right? -
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
Hi @crispyoz, wifi works fine with your build image :
Could you please tell me if you have rebased the branch openwrt-22.03 into your branch ? Could you please share the steps you have done for upgrading your openwrt build ?THank you so much for your time and help.
-
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@crispyoz Do you know how we can verify if the AP WiFi SSID was treating as hidden ?
For OpenWrt 22, which tag you used for the upgrade from 21 to 22? does it openwrt-22.03 ? -
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@crispyoz Thank you , we are using same as you an Openwrt build and we don't use onion-openwrt . Will check with your firmware binary and @Lazar-Demin's firmware too. In fact, it is strange that we have the wlan interface and everything looks good but we couldn't see the SSID and have the connection.
-
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@crispyoz I've tried that too but still no luck
-
RE: Omega 2S+: No WiFi Support with OpenWRT 21.02
@crispyoz root@OpenWrt:/# iw dev
phy#0
       Interface wlan0
               ifindex 5
               wdev 0x2
               addr 40:a3:6b:c3:17:1f
               type AP
               txpower 14.00 dBm
               multicast TXQ:
                       qsz-byt qsz-pkt flows  drops  marks  overlmt hashcol tx-bytes       tx-packets
                       0      0      0      0      0      0      0      0              0