Posts made by Josip Mlakar

You can check for solution among comments in this topic

@Chris-MacKay Cool, ty. /php/ "/usr/bin" worked before last update, after that I didn't try to install it again. Anyways I'll update my post

@Milan-Vuckovic wathever You want (example: www.example.com, www.my-page.com ...)

Ok i found what's wrong. Since PhpMyAdmin uses mysql, apache fails to starts before mysql is up. So very very very (did I say very? :D) dirty way to fix this is to add sleep 5 in start() function... Better way would be somthing like while (mysql not running) {wait} but I cant find a way to check mysql status. if I find a way I'll update this comment.
Anyways @Danny-van-der-Sluijs current solution is:
Make file named apache in /etc/init.d with content:

#!/bin/sh /etc/rc.common
START=95
start() {
    sleep 5
    apachectl start
}
restart() {
    apachectl restart
}
stop() {
    apachectl stop
}

Make it executable with chmod +x /etc/init.d/apache and then execute /etc/init.d/apache enable. Ofcourse don't forget to enable mysql to start on boot, you can do that with a command /etc/init.d/mysqld enable.

@Kit-Bishop You don't need to manualy handle enable to set up symlink (as stated here in Enable and disable section).

@Kit-Bishop Thank You for Your help, but /etc/init.d/apache enable creates symlink automatically. I also tried manual as you stated, but still no luck. Also tried to change START=95 into all kinds of numbers, but nothing works

@Danny-van-der-Sluijs well I tried to make file named apache in /etc/init.d with content:

#!/bin/sh /etc/rc.common
START=95
start() {
	apachectl start
}
restart() {
	apachectl restart
}
stop() {
	apachectl stop
}

made it executable with chmod +x /etc/init.d/apache
and then executed /etc/init.d/apache enable. It gets enabled and I can start it with /etc/init.d/apache startbut script doesen't start on boot I'll keep You updated if I find the solution:)

@Boken-Lin cool

@Boken-Lin of course I don't

DISCLAIMER:
I'm not responsible if You brick Your Onion following this tutorial. I'm Linux newbie so follow this tutorial on Your own reponsibillity

I tested it on 0.0.4 (b220) firmware.

Hi,
in this tutorial I'll show you how to install LAMP, FTP and PhpMyAdmin on your Onion Omega. In this tutorial I'll use nano for editing text (yes I'm newbie who deosen't use vi:) and you can install it with:

opkg update
opkg install nano

Make Your Onion to boot from USB storage

Apache as other packages requires a lot of space so first thing You will have to do is to extend your storage. I did this by following this tutorial. To do that you will have to format your USB storage into ext4 filesystem. You can do this by following commands:

opkg update
opkg install e2fsprogs
mkfs.ext4 /dev/<your partition>

(your partition is the same You got from fdisk command in the tutorial above)

Install SFTP
To install sftp use opkg install openssh-sftp-server command.

Install Apache server

opkg update
opkg install apache

Then edit httpd.conf:

nano /etc/apache/httpd.conf

Find Listen part in the file and change it into:

Listen <ip You use to connect to Your console>:<port number other than 80>

Also find ServerName and change it into:

ServerName <name for Your server>:<same port as in Listen>

Then you should find:

LogLevel debug

and change it into

LogLevel error

To start Apache server You hould execute:

apachectl start

Address of Your Apache server is : <Onion Console IP adress>:<Your chosen port>

Install PHP
Since I had some problems with PhpMyAdmin I installed all this packages for php (all of them are not required but those were that I installed)

opkg install php5 php5-cgi php5-fastcgi php5-mod-json php5-mod-session php5-mod-zip libsqlite3 zoneinfo-core php5-mod-pdo php5-mod-pdo-sqlite php5-mod-ctype php5-mod-mbstring php5-mod-gd sqlite3-cli php5-mod-sqlite3 php5-mod-curl curl php5-mod-xml php5-mod-simplexml php5-mod-hash php5-mod-dom php5-mod-iconv

Type:

ln -s /usr/bin/php-cgi /usr/share/cgi-bin/

and then add folowing lines into httpd.conf:

<Directory "/usr/share/cgi-bin">
    AllowOverride None
    Options FollowSymLinks
    Order allow,deny
    Allow from all
</Directory>

<Directory "/usr/bin">
    AllowOverride None
    Options none
    Order allow,deny
    Allow from all
</Directory>

Find ScriptAlias /cgi-bin/ "/usr/share/cgi-bin" and affter that line add ScriptAlias /php/ "/usr/bin" so you should have:

ScriptAlias /cgi-bin/ "/usr/share/cgi-bin"
ScriptAlias /php/ "/usr/bin"

Find <IfModule mime_module> section and add AddType application/x-httpd-php .php and Action application/x-httpd-php "/php/php-cgi"' into that section (before </IfModule>)so you should have:

AddType application/x-httpd-php .php
Action application/x-httpd-php "/php/php-cgi"
</IfModule> 

To change Directory Index, change DirectoryIndex index.html to DirectoryIndex index.php index.html.

Open php.ini:

nano /etc/php.ini

And uncomment (remove ; ) on lines:

extension  = gd.so
extension = mbstring.so
extension = pdo-mysql.so
extension = pdo_sqlite.so
extension = socket.so

Also do not specify doc_root so change doc_root into doc_root =

After that restart apache server: apachectl restart

Install mysql

opkg install mysql-server

Create two folders:

mkdir /mnt/data/mysql
mkdir /mnt/data/tmp

Use command:

mysql_install_db --force

Ok, nex step is to create root user (when I installed mysql, table with users was empty, if that's also Your case use this steps). Execute:

/usr/bin/mysqld --skip-grant-tables --skip-networking &
mysql -u root
use mysql;
FLUSH PRIVILEGES;
INSERT into user (Host, User,Password) values ('localhost','root',' ');
UPDATE user SET Password=PASSWORD('password you want') WHERE User='root';

update user set Select_priv='Y',Insert_priv='Y',Update_priv='Y',Delete_priv='Y',Create_priv='Y',Drop_priv='Y',Reload_priv='Y',Shutdown_priv='Y',Process_priv='Y',File_priv='Y',Grant_priv='Y',References_priv='Y',Index_priv='Y',Alter_priv='Y',Show_db_priv='Y',Super_priv='Y',Create_tmp_table_priv='Y',Lock_tables_priv='Y',Execute_priv='Y',Repl_slave_priv='Y',Repl_client_priv='Y',Create_view_priv='Y',Show_view_priv='Y',Create_routine_priv='Y',Alter_routine_priv='Y',Create_user_priv='Y' where user='root';

FLUSH PRIVILEGES;

To start mysql server you should type:

/etc/init.d/mysqld start

Install PhpMyAdmin
To install PhpMyAdmin you should download it from link and extract it to /usr/share/htdocs (Apache server root) and rename root folder of PhpMyAdmin (PhpMyAdmin-4..-allLanguages) to phpmyadmin.
You should copy the content of config.sample.inc.php to config.inc.php and edit it:

cp usr/share/htdocs/phpmyadmin/config.sample.inc.php usr/share/htdocs/phpmyadmin/config.inc.php
nano usr/share/htdocs/phpmyadmin/config.inc.php

Change Authentication type and Servers parameters into:

$cfg['Servers'][$i]['auth_type'] = 'cookie';

$cfg['Servers'][$i]['host'] = '127.0.0.1';
$cfg['Servers'][$i]['connect_type'] = 'tcp';
$cfg['Servers'][$i]['compress'] = false;
$cfg['Servers'][$i]['extension'] = 'mysql';
$cfg['Servers'][$i]['AllowNoPassword'] = true;

After that open /usr/share/htdocs/phpmyadmin/libraries/common.inc.php with nano (or whatever You use) and comment following part:

 #if (PMA_MYSQL_INT_VERSION < $cfg['MysqlMinVersion']['internal'] {
    #    PMA_fatalError(
    #        __('You should upgrade to %s %s or later.'),
    #        array('MySQL', $cfg['MysqlMinVersion']['human'])
    #    );
    #}

And that's it:)
You can access PhpMyAdmin on <Onion Console IP adress>:<Your chosen port>/phpmyadmin

UPDATE (ty to @Chris-MacKay)
If you get some permission errors change ScriptAlias /php/ "/usr/bin" to ScriptAlias /php/ "/usr/bin/" in httpd.conf .