Hi! I'm trying to compile "arduino-dock" package from openwrt feed, but source code can't be retrieved from github. Here's the error:

Checking out files from the git repository...
Cloning into 'arduino-dock'...
ERROR: Repository not found.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.

Here's url of package read from package/feeds/onion/arduino-dock/Makefile:

git@github.com:OnionIoT/arduino-dock.git that's equal to https://github.com/OnionIoT/arduino-dock.git

This page doesn't exist, but this problem is common to other packages. Can you fix it?

I tried to install the ipk from your repository, but binaries are compiled with uclibc and newest openwrt version uses musl, so I receive this error:

/usr/bin/run-avrdude: line 31: twidude: not found

Also, sending arduino sketch from the Arduino app, I have this error:

> Flashing application '/tmp/sketch.hex' ...
Error: Could not open file '/dev/i2c-0' or '/dev/i2c/0': No such file or directory

I compiled kmod-i2c-core and loaded i2c-dev module and sent the command

mknode /dev/i2c-0 c 89 0

but it doesn't solve the problem. How can I solve it?

EDIT 1:

Solved the problem with i2c: omega (1) doesn't have hardware i2c, so it uses gpio pin 21 (SDA) and 20 (SCL). You have to compile kmod-i2c-gpio-custom and execute on boot (or put in /etc/init.d/boot)

insmod i2c-gpio-custom bus0=0,21,20

Hi! I'm trying to compile "arduino-dock" package from openwrt feed, but source code can't be retrieved from github. Here's the error:

Checking out files from the git repository...
Cloning into 'arduino-dock'...
ERROR: Repository not found.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.

Here's url of package read from package/feeds/onion/arduino-dock/Makefile:

git@github.com:OnionIoT/arduino-dock.git that's equal to https://github.com/OnionIoT/arduino-dock.git

This page doesn't exist, but this problem is common to other packages. Can you fix it?

I tried to install the ipk from your repository, but binaries are compiled with uclibc and newest openwrt version uses musl, so I receive this error:

/usr/bin/run-avrdude: line 31: twidude: not found

Also, sending arduino sketch from the Arduino app, I have this error:

> Flashing application '/tmp/sketch.hex' ...
Error: Could not open file '/dev/i2c-0' or '/dev/i2c/0': No such file or directory

I compiled kmod-i2c-core and loaded i2c-dev module and sent the command

mknode /dev/i2c-0 c 89 0

but it doesn't solve the problem. How can I solve it?

EDIT 1:

Solved the problem with i2c: omega (1) doesn't have hardware i2c, so it uses gpio pin 21 (SDA) and 20 (SCL). You have to compile kmod-i2c-gpio-custom and execute on boot (or put in /etc/init.d/boot)

insmod i2c-gpio-custom bus0=0,21,20

@lichtteil have you checked program permissions?

@Benjamin-Rau gphoto2 should be in /usr/bin/, check your PATH environment

Try with this compiled today:
libgphoto2-drivers_2_5_9-1_ar71xx.ipk
libgphoto2_2_5_9-1_ar71xx.ipk
gphoto2_2_5_9-1_ar71xx.ipk

If you want to compile yourself:
package.zip
Fix.txt

If you can remove this manual fix please notify me

Hi, I have a problem building Onion Omega software for OpenWRT.

I followed this wiki and configured a base OpenWRT system. Then when I select any package from Onion Omega software, it will not compile with this error: link log. It seams that it's a problem with Github. Also "arduino-dock" is not a program listed into OnionIoT account. So, what's the problem?