Hi all,
As a follow up to this, the Omega2 LTE has been working well utilizing power through the GPIO pins.
We have discovered an issue however with using a LiPo battery as a back up.
The LiPo happily runs the board as expected, but the charging circuit is not working.
Is there a way we can power the charging circuit from the 5V GPIO pins?
M
Posts made by Mark C
-
RE: Powering the Omega2 LTE via GPIOposted in Omega Talk
-
Powering the Omega2 LTE via GPIOposted in Omega Talk
Hi all,
We are working on a mobile application with the Omega2 LTE.
In this instance using the USB-C connector to power the unit is not the most practical solution.
Is back-powering the unit via the 3.3V or 5V GPIO pins possible?
We have done this before with another brand of SBC.Thanks