@Brian-Robbins Hey Brian, and anyone else having this issue.
I made it work and believe it was this that made it happen:
edit wireless configuration:
vi /etc/config/wireless
change option ApCliEncrypType 'AES'
to option ApCliEncrypType 'psk2'
restart wireless
/etc/init.d/wireless restart
Then I did automatic wifisetup, to me it looked that it hangs again, but after I tried to oupgrade it worked
Hi,
I try to connect to my home WiFi, after several tries it just hangs like this in the end... Password is correct. I tried that IP collision solution as well, just to make sure that's not the issue.
Restarting wifimanager for changes to take effect
root@Omega-B625:/etc/init.d# [ 1704.400692] br-wlan: port 2(ra0) entered disabled state
[ 1704.865964] EEPROM:Read from [factory] offset 0x0,length 0x400.
[ 1707.351020] ch2 bssid=2c:95:7f:1e:52:97
[ 1707.355072] ch6 bssid=10:fe:ed:4e:b0:c8
[ 1707.359047] =====================================================
[ 1707.365264] Channel 1 : Dirty = 32, False CCA = 0, Busy Time = 633, Skip Channel = FALSE
[ 1707.373485] Channel 2 : Dirty = 100, False CCA = 0, Busy Time = 671, Skip Channel = FALSE
[ 1707.381792] Channel 3 : Dirty = 56, False CCA = 0, Busy Time = 1230, Skip Channel = FALSE
[ 1707.390082] Channel 4 : Dirty = 56, False CCA = 0, Busy Time = 260, Skip Channel = FALSE
[ 1707.398305] Channel 5 : Dirty = 56, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1707.406351] Channel 6 : Dirty = 90, False CCA = 0, Busy Time = 1308, Skip Channel = FALSE
[ 1707.414658] Channel 7 : Dirty = 32, False CCA = 0, Busy Time = 2, Skip Channel = FALSE
[ 1707.422701] Channel 8 : Dirty = 28, False CCA = 0, Busy Time = 2, Skip Channel = FALSE
[ 1707.430727] Channel 9 : Dirty = 24, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1707.438770] Channel 10 : Dirty = 20, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1707.446981] Channel 11 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1707.455032] =====================================================
[ 1707.461228] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 11
[ 1707.470040] Min Dirty = 0
[ 1707.472711] ExChannel = 0 , 0
[ 1707.475716] BW = 20
[ 1707.507257] br-wlan: port 2(ra0) entered forwarding state
[ 1707.512857] br-wlan: port 2(ra0) entered forwarding state
[ 1709.511025] br-wlan: port 2(ra0) entered forwarding state
[ 1726.804531] br-wlan: port 2(ra0) entered disabled state
[ 1727.269452] EEPROM:Read from [factory] offset 0x0,length 0x400.
[ 1729.761026] ch2 bssid=2c:95:7f:1e:52:97
[ 1729.765026] ch11 bssid=c0:7c:d1:af:6d:89
[ 1729.769089] =====================================================
[ 1729.775300] Channel 1 : Dirty = 32, False CCA = 0, Busy Time = 1295, Skip Channel = FALSE
[ 1729.783608] Channel 2 : Dirty = 80, False CCA = 0, Busy Time = 1253, Skip Channel = FALSE
[ 1729.791917] Channel 3 : Dirty = 32, False CCA = 0, Busy Time = 1219, Skip Channel = FALSE
[ 1729.800217] Channel 4 : Dirty = 28, False CCA = 0, Busy Time = 11, Skip Channel = FALSE
[ 1729.808355] Channel 5 : Dirty = 24, False CCA = 0, Busy Time = 15, Skip Channel = FALSE
[ 1729.816486] Channel 6 : Dirty = 20, False CCA = 0, Busy Time = 663, Skip Channel = FALSE
[ 1729.824704] Channel 7 : Dirty = 20, False CCA = 0, Busy Time = 10, Skip Channel = FALSE
[ 1729.832836] Channel 8 : Dirty = 24, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1729.840861] Channel 9 : Dirty = 28, False CCA = 0, Busy Time = 625, Skip Channel = FALSE
[ 1729.849096] Channel 10 : Dirty = 32, False CCA = 0, Busy Time = 1, Skip Channel = FALSE
[ 1729.857231] Channel 11 : Dirty = 70, False CCA = 0, Busy Time = 1148, Skip Channel = FALSE
[ 1729.865622] =====================================================
[ 1729.871829] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 6
[ 1729.880554] Min Dirty = 20
[ 1729.883322] ExChannel = 0 , 0
[ 1729.886329] BW = 20
[ 1729.917855] br-wlan: port 2(ra0) entered forwarding state
[ 1729.923445] br-wlan: port 2(ra0) entered forwarding state
[ 1731.921012] br-wlan: port 2(ra0) entered forwarding state
[ 1748.340293] br-wlan: port 2(ra0) entered disabled state
[ 1749.402632] EEPROM:Read from [factory] offset 0x0,length 0x400.
[ 1751.891025] ch2 bssid=2c:95:7f:1e:52:97
[ 1751.895026] ch11 bssid=c0:7c:d1:af:6d:89
[ 1751.899088] =====================================================
[ 1751.905297] Channel 1 : Dirty = 32, False CCA = 0, Busy Time = 1233, Skip Channel = FALSE
[ 1751.913608] Channel 2 : Dirty = 80, False CCA = 0, Busy Time = 669, Skip Channel = FALSE
[ 1751.921832] Channel 3 : Dirty = 32, False CCA = 0, Busy Time = 715, Skip Channel = FALSE
[ 1751.930033] Channel 4 : Dirty = 28, False CCA = 0, Busy Time = 1875, Skip Channel = FALSE
[ 1751.938341] Channel 5 : Dirty = 24, False CCA = 0, Busy Time = 1342, Skip Channel = FALSE
[ 1751.946648] Channel 6 : Dirty = 20, False CCA = 0, Busy Time = 3646, Skip Channel = FALSE
[ 1751.954955] Channel 7 : Dirty = 20, False CCA = 0, Busy Time = 94, Skip Channel = FALSE
[ 1751.963087] Channel 8 : Dirty = 24, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1751.971212] Channel 9 : Dirty = 28, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[ 1751.979243] Channel 10 : Dirty = 32, False CCA = 0, Busy Time = 2, Skip Channel = FALSE
[ 1751.987382] Channel 11 : Dirty = 70, False CCA = 0, Busy Time = 584, Skip Channel = FALSE
[ 1751.995684] =====================================================
[ 1752.001880] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 6
[ 1752.010647] Min Dirty = 20
[ 1752.013411] ExChannel = 0 , 0
[ 1752.016417] BW = 20
[ 1752.047976] br-wlan: port 2(ra0) entered forwarding state
[ 1752.053581] br-wlan: port 2(ra0) entered forwarding state
[ 1754.051012] br-wlan: port 2(ra0) entered forwarding state
GUI interface via AP also just spins that circle and says it cannot connect to wifi, try again...
so.. yeah, any suggestions?