Solved!
Seems to be a corrupt download.
Downloaded WRAPCore again, copied it on a USB stick and renamed it "Omage2.bin"
holding the reset button while rebooting, choose "2Load from USB"
and after some minutes the problem was solved
Mike
M
Posts made by MOnion G
-
RE: [Solved] Omega2p Warp upgrade fails ?posted in Omega Talk
-
[Solved] Omega2p Warp upgrade fails ?posted in Omega Talk
An upgrade with
'oupgrade --latest'
fails with the error msg :
"> ERROR: Could not connect to Onion Firmware Server! Check your internet connection and try again!"
The internet connection is working and "ping repo.onion.io
PING repo.onion.io (52.216.83.26): 56 data bytes
64 bytes from 52.216.83.26: seq=0 ttl=44 time=104.056 ms" works as shown!
Manual upgrade:
'wget http://repo.onion.io/omega2/images/omega2p-v0.2.0-b177.bin'
downloads the file, but
'sysupgrade omega2p-v0.2.0-b177.bin'
stops and reboot after:
' Saving config files...
killall: watchdog: no process killed
Sending TERM to remaining processes ... onion-helper udhcpc udhcpc'
And deletes the downloaded firmware file.
Any ideas?
Thanks
Mike