Posts made by pvadam

Hi,

I am trying to port my code using RFID RC522 on RPI to Omega 2+, but I got stuck, I missing a piece of the puzzle.

I have updated the RPI code, but my Omega still not recognize the fobs. The whole project is uploaded here:
https://github.com/pvadam/omega-rc522.

Did anyone have success with setting up an RC522 on Omega 2+? What am I doing wrong with the SPI protocol?

Thanks,
Peter

Here is how I solved my wifi issue:
https://community.onion.io/topic/1149/omega2-fails-to-connect-to-wifi/30

Hope this helps!

Hi Guys,

let me add my 2 cents..

The way I have solved my wifi issue:

1. Check if you have issues already solved by the community, like

• there isn't any collision going on,
• there are no problems with the channels,
• or the encryption,
• or your router!

1. wifisetup, and follow the guide
2. vi /etc/config/wireless
3. Focus on the ApCli settings in the wifi-iface block! It was not updated in my case and was also disabled (option ApCliEnable '0'). Add or update all the relevant ApCli options manually to your file! Like this:

config wifi-device 'ra0'
        option type 'ralink'
        option mode '9'
        option channel 'auto'
        option txpower '100'
        option ht '20'
        option country 'US'
        option disabled '0'

config wifi-iface
        option device 'ra0'
        option network 'wlan'
        option mode 'ap'
        option encryption 'psk2'
        option key '12345678'
        option ssid 'Omega-XXXX'
        option ApCliSsid 'MyID'
        option ApCliPassWord 'XXXXX'
        option ApCliEncrypType 'AES'
        option ApCliAuthMode 'WPA2PSK'
        option ApCliEnable '1'

config wifi-config
        option ssid 'MyID'
        option encryption 'WPA2PSK'
        option key 'XXXXXX'

1. wifi
2. Enjoy your network!

Hope this works for you!