Posts made by simon jones

@simon-jones
resolved
I had to oupgrade -l to enable the changes to
etc/opkg/dist......... uncomment lines 2&5

oupgrade alone did not upgrade to latest firmware, which threw me

Cheers

SImon

Hi
opkg update completed
opkg install nano ..........fails

Unknown package 'nano'.
Collected errors:

• opkg_install_cmd: Cannot install package nano.

any advise please

regards

Simon

Hi I have this same message repeatedly
MlmeEnqueueForRecv(): un-recongnized mgmt->subtype=4, STA-80:7d:14:2d:82:0e

serial connection to exp dock, have tried different USB cables including the one supplied in the Maker Kit.

Any Ideas?

Thanks

Simon

well what a plonker I am........ resolved this after many hours fiddling with hardware and drivers, the terminal goes blank after screen command and thats what got me,,....all you have to do is re-hit enter..

fool :):):)

Hi I received a power dock, relay, bluetooth, and omega yesterday. wifi connects well and managed to access the online web connection to change password etc.
However I am having real trouble with serial USB0 connection via command line with both Ubuntu and linux mint on two different laptops and with two different cables.
I get as far as obtaining this as in step 5 of guide:
Step 5: Run ls /dev/ttyUSB* to see if the USB-to-Serial device can be detected. If the driver is successfully installed, you should be able to see a device with a name similar to /dev/ttyUSB0.
I get a different coloured command line response which means driver is installed
then when I try step 6
sudo screen /dev/ttyUSB0 115200
the terminal hangs goes blank with no response. crashes.

any help please?