Posts made by Vitalii Topoliuk

It works in both ranges, I have both 2.4 and 5 GHz devices attached.

+1
Have same question, current setup (docks + sensors) doesn't give you any advantages of small size as you need to use dock =(
I would like to know how I can provide at least external power source to Omega without using dock.

@Boken-Lin said:

https://s3-us-west-2.amazonaws.com/onion-downloads/openwrt/kmod-fs-hfs_3.18.23-1_ar71xx.ipk

Exactly the same problem

root@Omega-09BD:/tmp# opkg install kmod-fs-hfs_3.18.23-1_ar71xx.ipk
Installing kmod-fs-hfs (3.18.23-1) to root...
Collected errors:

• satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-fs-hfs:
• kernel (= 3.18.23-1-e0e84d5fbc36a1efeaeb8472e8c738c9) *
• opkg_install_cmd: Cannot install package kmod-fs-hfs.

Hi guys,
After firmware upgrade Omega doesn't list my wi-fi in wifisetup and can't connect directly. Even with new firmware everything was ok before I did factory-reset -f.
I have 2 Omegas so I checked it and can confirm it reproduces.

Any way to fix it? Or can you provide me link to some first versions of firmware, so I can downgrade?

Documentation sais you can use any of kmod-fs-*, but it's not true. You can use only ext4 as it is installed initially if you will try install any other FS you will see error

•  satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-fs-hfs:
  

•  kernel (= 3.18.20-1-7bed08fa9c06eb8089e82c200340ec66) 
  

•  opkg_install_cmd: Cannot install package kmod-fs-hfs.
  

And formating partition as ext4 is tricky when you are on OS X.

Is there any information when BLE Dongle support will be added?

@Andrei-Railean thank you for your recommendation it makes sense and I will try when I will have more time. Also I tried to install python modules in old-scool way python setup.py install but there are was a lot of errors related read only file system. Unfortunately I'm out of my onion for now so can't paste output here.

I was looking where to submit this bug, but all links point to this forum.
It's https://onion.io bug, every time I'm closing browser site logs me out and next time I open https://onion.io I'm redirected to auth page where I need to enter my credentials again. "Remember me" checkbox doesn't work. It's really annoying bug, can you fix it please or at least do not redirect user to auth page automatically?
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_11_2) AppleWebKit/601.3.9 (KHTML, like Gecko) Version/9.0.2 Safari/601.3.9

In my case Omega didn't work because I used cables from other USB powered devices (from my headphones, power banks, etc). After switching to cable from Arduino Leonardo I was able to connect to Omega. Probably some cables have only power function without data transfer

Ok, so I did factory reset, then:
opkg update
opkg install python-light
opkg install python-pip
But still no luck, no space left and I can't continue

@Pedro-Baco I would like to try it, but opkg remove python doesn't remove python ( so I can't try

I'm working tiny device, no bigger than keychain. It's no space to fit dock inside.

Hi guys,
All I need is python + python pip + rpyc, but it's not enough space even for this amount of software. In my case I can't USB storage so can I remove something to release some space by removing some kind of software? For example I don't need web server.

Ω-ware: 0.0.5 b251

root@Omega-282A:/# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 8.1M 8.0M 136.0K 98% /
/dev/root 6.8M 6.8M 0 100% /rom
tmpfs 29.9M 84.0K 29.8M 0% /tmp
/dev/mtdblock3 8.1M 8.0M 136.0K 98% /overlay
overlayfs:/overlay 8.1M 8.0M 136.0K 98% /
tmpfs 512.0K 0 512.0K 0% /dev

Replacing power cable works fine! Thanks!

I can't connect to my board using terminal because there are no serial device under /dev even with latest drivers (but driver doc says it supported only by 10.10 anyway). Also I can't connect using my Wi-Fi. After connecting to setup wizard and choosing network progress never ends, my laptop looses Wi-Fi connection to board and I need start it from scratch.

P.S. Even this discussion doesn't work on Safari browser which one is default for OS X.