After many hours, wasted on Wifi connection problem resolving, find solution for me.
manually setup my Omega 2 WiFi network before start setup Omega2 (b160) in web mode after upgrade.
My home WiFi Ap name is 'dd-wrt'
Work usually in b/g mode with TKIP encription
Most successfully variant for me at start point - has been set WEP and 'no password mode' on router for upgrade Omega2 to (b160) version of firmware.
And I'd set back WPA-Personal mode and TKIP on Wifi router.
After as I made this, I meet only the troubles with my Omega2 connections.
My Omega 2 is:
Firmware 0.1.10 (b160)
Latest Firmware 0.1.10 (b160)
Linux Omega-4C77 4.4.46 #0 Thu Feb 2 23:46:03 2017 mips GNU/Linux
What I do for resolving connection problem:
Made factory reset via web interface (192.168.3.1)
Connect with Putty to 192.168.3.1 (ssh, port 22) as root/onioneer
root@Omega-4C77:~# vi /etc/config/wireless
change your ssid and password AND COUNTRY! from 'US' to 'CAN'. It is needed for WiFi change channel restrictions (I'm not sure, but... it's work):
warning: In Bold - options, which I changed from original values, but remember: it's must be in correlation with your wifi router settings. use omega2 linux command aps for router connect information. Something like a
6 dd-wrt c8:3a:35:ea:29:58 WPAPSK/TKIP 52 11b/g NONE In in my case
config wifi-device 'ra0'
option type 'ralink'
option mode '9'
option channel 'auto'
option txpower '100'
option ht '20'
option country 'CAN'
option disabled '0'
option device 'ra0'
option network 'wlan'
option mode 'ap'
option encryption 'psk2'
option key '12345678'
option ApCliEnable '1'
option ApCliSsid 'dd-wrt'
option ApCliAuthMode 'WPAPSK'
option ApCliEncrypType 'TKIP'
option ApCliPassWord '0015081975'
option ssid 'Omega-4C77'
- Save your work in vi: <esc> :wq
- root@Omega-4C77:~#service network restart, reconnect Putty
- check 'root@Omega-4C77:~# ping 126.96.36.199' - it must work now
- opkg update
- opkg install mc - it is not very important step
- go again into web interface (192.168.3.1, btw, after as I connected to my Omega-4C77 AP again, it's already works as router - internet on PC is exists now), and step by step complete setup procedure.
But do not choose WiFi network setup, it's defined already at step 3. Choose "pass step".
Sorry for my Martian