Omega2+ does not power-down by command and can't change default password
-
I started playing around with the just-arrived Omega2+ and I noticed the following:
- poweroff and power-down commands both reboot the omega instead of shutting down.
- Password change made in Settings -> Security Settings in the console is never saved (forces me to use the default password).
Firmware version is 0.1.10 (b160) R1
Are these known problems and are there any fixes?
~rawjeev
-
@Rajeev-B
The second one is already listed, the first one isn't, but is common knowledge in this community, and should be listed.Workaround for the second one, use console terminal, ssh o serial connection, and use
passwd
.
-
The hardware is not capable of powering itself down.
At best the firmware could be made to halt, perhaps a slowed clock and an infinite loop or at the outside an actual execution halt.
3 out of 3