How to turn-off LEDs on Omega2 Expansion Dock and Omega2

Enrico Bermudez

I've been doing a lot of searches on how to turn-ff the LEDs completely, but nothing is working on my Omega2 Expansion Dock and Omega2.
I've seen the documentation on how to turn-off the RGB LED on the Omega 1 expansion dock, which doesn't apply here.
Any help would be appreciated.

György Farkas

@Enrico-Bermudez
Onion Omega2 Documentation

The Omega’s LED

turn OFF
echo gpio > /sys/class/leds/omega2\:amber\:system/trigger
or
fast-gpio set 44 1

turn ON
echo default-on > /sys/class/leds/omega2\:amber\:system/trigger
or
fast-gpio set 44 0

Expansion Dock

RGB LED

The RGB LED on the Expansion Dock consists of three LEDs that give you the ability to create RGB colors on the Expansion Dock.
GPIO 17 controls the red LED. GPIO 16 controls the green LED. GPIO 15 controls the blue LED.
The RGB LED is active-low, meaning that setting the GPIO to 0 will turn on the designated LED.

So in the next commands n must be 17, 16 or 15
gpioctl dirout n

turn OFF the R, G or B LED
gpioctl dirout-high n
or
fast-gpio set n 1

turn ON the R, G or B LED
gpioctl dirout-low n
or
fast-gpio set n 0