remove last Network

Fabian Nydegger 0

Hello

If you remove the last configured Network from your /etc/config/wireless

wifisetup remove -ssid 'yourssid'
wifimanager
ifconfig
apcli0    Link encap:Ethernet  HWaddr XXXXXXXXXXXXXXX
          inet addr:192.168.1.15  Bcast:255.255.255.0  Mask:255.255.255.0
          inet6 addr: XXXXXXXXXXXXXXX Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

You won't be able to disconnect from that network,
witout removing them in the wifi-face list and then reboot

vi /etc/config/wireless
config wifi-device 'ra0'
        option type 'ralink'
        option mode '9'
        option channel 'auto'
        option txpower '100'
        option ht '20'
        option country 'US'
        option disabled '0'

config wifi-iface
        option device 'ra0'
        option network 'wlan'
        option mode 'ap'
        option encryption 'psk2'
        option key '12345678'
        option ApCliAuthMode 'removeThis'
        option ApCliEncrypType 'removeThis'
        option ssid 'Omega-XXXX'
        option ApCliSsid 'removeThis'
        option ApCliPassWord 'removeThis'
        option ApCliEnable '1'

wifimanager


ifconfig
apcli0    Link encap:Ethernet  HWaddr XXXXXXXXXXXXXXX
          inet addr:192.168.1.15  Bcast:255.255.255.0  Mask:255.255.255.0
          inet6 addr: XXXXXXXXXXXXXXX Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

reboot

ifconfig
apcli0    Link encap:Ethernet  HWaddr XXXXXXXXXXXXXXX          
          inet6 addr: XXXXXXXXXXXXXXX Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

aslong as there's no configuration for an other Network the wifimanager won't change anything.
Is there some command or something that can make that change without rebooting?