[resolved] omega2 uhttpd php7-cgi Bad gateway

Mentor Gashi

Greetings folks,

been trying for 2 hours to setup php on omega2, I followed this tutorial:
https://docs.onion.io/omega2-docs/installing-and-using-php.html

After I add the list interpreter ".php=/usr/bin/php-cgi" and option index_page 'index.php' and restaring the uhttpd /etc/init.d/uhttpd restart I get the Bad Gateway error, and nothing else. Tried a few times, factory reset the omega but the results were same. Then lately I tried the upgrade onion-os, and when I navigate to Code Editor on http://192.168.3.1/OnionOS/ I get the same error as below.

Bad Gateway
The process did not produce any response

Tried to check if firmware is up too:
`root@Omega-99EF:/etc/opkg# oupgrade

Device Firmware Version: 0.1.10 b160
Checking latest version online...
Repo Firmware Version: 0.1.10 b160
Comparing version numbers
Device firmware is up to date!`

Anyone having this error recently? How would I get php working?

Zheng Han

@Mentor-Gashi try a factory restore firstboot and a clean install of onion-os and oos-app-editor it should configure php for you automatically

make sure you are at the latest firmware build oupgrade -l

Mentor Gashi

@Zheng-Han said in omega2 uhttpd php7-cgi Bad gateway:

@Mentor-Gashi try a factory restore firstboot and a clean install of onion-os and oos-app-editor it should configure php for you automatically
make sure you are at the latest firmware build oupgrade -l

Thanks, the -l flag did indeed upgrade the firmware despite the regular check was claiming the firmware was up to date.

Going to give it a try if I can get a use of it