Simple networking projects, best approach

[Filipe Madureira]

@crispyoz said in Simple networking projects, best approach:

OOTB Pro

What's this? Wasn't able to find anything with the help of google.

[György Farkas]

@Filipe-Madureira Out Of The Box (Omega2) Pro

[crispyoz]

@György-Farkas oops I used too much slang

[Filipe Madureira]

I was planning on using the omega2+ as a station to gather sensor data and send it thtough my LAN. Is this a bad idea?

[cas]

@Filipe-Madureira
No, I am doing exactly that.
Why do you think this may be a bad idea? Did you read or observe something that made you think that?

[Filipe Madureira]

@cas From what i understood people use these boards temporary and not for long-term projects. Am i mistaken?

[Filipe Madureira]

This post is deleted!

[luz]

@Filipe-Madureira You'll find many different use cases for the Omega2 here, I guess

My own use case is indeed very long term. I use the Omega2 modules in products that run 24/7 and are expected to do that for years (and have successfully proven that in the past two years already).

I find the combination of a well known router SoC (MT7688) running OpenWrt Linux, which is very carefully optimized for exactly such 24/7 networking devices, a very solid foundation to build on.

OnionOS adds a lot on top of OpenWrt to make it attractive also for the "OOTB" experiment type of projects. Still, it's OpenWrt, so most of the networking howtos of the OpenWrt community can be applied.

Plus, if needed, the Omega2 hardware can also run plain OpenWrt, which might be the way to go for pure networking projects.

You can even build your own customized OpenWrt based firmware (that's what I do for my devices).

So definitely: yes, the Omega2 is good for long-term projects.

[Filipe Madureira]

@luz said in Simple networking projects, best approach:

MT7688

Thank you so much, your reply is very informative and uplifting! Any suggestion on learning OpenWrt for the first time? OnionOS is my first time using an OpenWrt-based OS! I plan on working on heavily networking-focused projects, mostly IoT!

[luz]

@Filipe-Madureira The official openwrt site/wiki has a lot of information and howto guides.

With OnionOS, everything related to the OpenWrt Web UI (LuCI) does not apply, but on the command line most things should work the same or at least in a similar way.

The set of packages installed by default is different from stock OpenWrt, so getting familiar with opkg and how to add package feeds might be helpful.

The standard network configuration is also different, but the powerful uci configuration management is available and worth learning (IMHO a very clever and efficient solution for cleaning up the mess of many different config files and formats). Also note that OnionOS uses a proprietary wifi driver not known in standard OpenWrt, so for details about wifi you need to check the onion docs.

[Filipe Madureira]

@luz Thank you. I have some very specific interrogatives for which I'll open a dedicated thread but I'm really satisfied with my little onion computers so far. Thanks for the links!