USB Drivers not working
-
When plugging in my usb drive it wont be registered or come up in the messages or console outputs. When I plug in my keyboard I get this. Not sure where to go from hre. I just flashed in the latest image from here
http://repo.onioniot.com/omega2/images/
and gave it the following packages
opkg install kmod-usb-net-rndis
opkg install kmod-nls-base kmod-usb-core kmod-usb-net kmod-usb-net-cdc-ether kmod-usb2
kmod-usb-ohci kmod-usb-uhci kmod-usb-storage libusbmuxd
opkg install kmod-usb-net-ipheth usbmuxd libimobiledevice usbutilsI had another opnion that wont boot anymore (voltage going trhough but I dont see any output in teminal when accessing via serial) that used to work with this but this one won't
] usb 2-1: device descriptor read/64, error -62
[ 146.282419] usb 2-1: device descriptor read/64, error -62
[ 146.612390] usb 2-1: new low-speed USB device number 3 using ohci-platform
[ 146.832422] usb 2-1: device descriptor read/64, error -62
[ 147.162386] usb 2-1: device descriptor read/64, error -62
[ 147.282481] usb usb2-port1: attempt power cycle
[ 147.552426] usb 2-1: new low-speed USB device number 4 using ohci-platform
[ 147.992377] usb 2-1: device not accepting address 4, error -62
[ 148.202447] usb 2-1: new low-speed USB device number 5 using ohci-platform
[ 148.642381] usb 2-1: device not accepting address 5, error -62
[ 148.648412] usb usb2-port1: unable to enumerate USB device
-
-
I already had usbutils loaded but here is the output
opkg install usbutils
Package usbutils (014-1) installed in root is up to date.
root@Omega-7E26:/# lsusb -vBus 002 Device 001: ID 1d6b:0001 Linux 5.10.146 ohci_hcd Generic Platform OHCI controller
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0001
bcdDevice 5.10
iManufacturer 3 Linux 5.10.146 ohci_hcd
iProduct 2 Generic Platform OHCI controller
iSerial 1 101c1000.ohci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0008
Ganged power switching
Per-port overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self PoweredBus 001 Device 001: ID 1d6b:0002 Linux 5.10.146 ehci_hcd EHCI Host Controller
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d6b
idProduct 0x0002
bcdDevice 5.10
iManufacturer 3 Linux 5.10.146 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 101c0000.ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self Powered
-
@baby-Onioneer error 62 is a power issue, try a powered USB hub or a different drive. Since you are using USB power the drive, check your Omega2 is powered sufficiently.