Where to buy 32-pin connector for the Omega
-
Hi,
needing to build my own dock, I am looking for a place where to buy the 32-pin, 2mm pitch connectors (male-female), that I would solder on my dock to plug the Omega. I would need of course 2 of them, spaced by 24.4mm, for the 2 rows.
Does anyone know where to find that? This 2mm pitch is very specific and hard to find...
Ideally a provider shipping quickly to France (excluding US-based ones unfortunately).
Thanks!
-
@Frederic-Baumann Don't know if this helps or not, but a Google search on:
- connector 2mm pitch
Turned up a few references. From what I believe you are probably looking for, these two may be useful:
- https://www.samtec.com/connectors/standard-board-to-board/2mm
- http://gct.co/pcb-board-to-board/2mm-pin-header-socket.aspx
Though you may need to cut one down to size and mount 2 separately for the two rows
-
I think this is what you are looking for :
https://www.sparkfun.com/products/11376
-
Thanks for your answers.
Actually THE one connector fitting the need is here (thanks Kit!):http://gct.co/connector/?series=BF085, with the 16-pin configuration => BF085-16
@Sylvain, almost this, except that the pitch is 2.54mm / 0.1inch, while for the Omega we need a 2mm pitch, quite unstandard.
Unfortunately, so far I can find no reseller of the GCT BF085-16. Keep on searching...
-
@Frederic-Baumann
I found this on amazon : http://www.amazon.com/Single-Straight-Female-Header-Socket/dp/B00GYRN1J0maybe you can contact the seller
-
I think i've found a few weeks ago something on ebay, try searching by 2mm header and you'll find a few hits.
-
Finally found it on Farnell:
http://fr.farnell.com/samtec/mms-116-01-l-sv/socket-2-0mm-vert-1x16way/dp/1805663Ref MMS-116-01-L-SV
-
