We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

help! sysupgrade bin error omega2 not working



  • 128 MB
    relocate_code Pointer at: 87f60000
    flash manufacture id: c2, device id 20 19
    find flash: MX25L25635E
    *** Warning - bad CRC, using default environment

    ============================================
    Onion Omega2 UBoot Version: 4.3.0.3

    ASIC 7628_MP (Port5<->None)
    DRAM component: 1024 Mbits DDR, width 16
    DRAM bus: 16 bit
    Total memory: 128 MBytes
    Flash component: SPI Flash
    Date:Oct 18 2016 Time:17:29:05

    icache: sets:512, ways:4, linesz:32 ,total:65536
    dcache: sets:256, ways:4, linesz:32 ,total:32768
    CPU freq = 575 MHZ
    Estimated memory size = 128 Mbytes
    Resetting MT7628 PHY.
    Initializing MT7688 GPIO system.


    • Hold Reset button for more options *

    Boot Linux from Flash NO RESET PRESSED.

    Booting image at bc050000 ...

    Bad Magic Number,01000000



  • Wow...you've been waiting a month?
    Speedy service huh?

    Try the Web Upgrade or the USB upgrade.

    Using the serial console...
    Hold the Reset button down and use the switch to power it on.

    Please select option:

    [ Enter ]: Boot Omega2.
    [ 0 ]: Start Web recovery mode.
    [ 1 ]: Start command line mode.
    [ 2 ]: Flash firmware from USB storage.

    http://repo.onion.io/omega2/images/omega2p-v0.1.7-b140.bin

    USB Upgrade
    Rename the downloaded firmware to omega2.bin
    Place that file on a USB Stick with a formatted with a Micro$oft file system...EXFAT (the de facto standard) should be OK.
    However NTFS will not work for this application.

    Then use Option 2 ...


Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.