Please help Omega 2 not working

[Michael Irvine]

Hi there I am not really sure where to put this so I have put another post here.

I am having some strange problems with the new omega 2 module as I am unable to begin the setup either through wifi or through serial.

The wifi access point from the omega 2 is not visible and when I connect to it through serial it hangs at the line:
[ 18.825147] EEPROM:Read from [factory] offset 0x0,length 0x400.

At this point the omega 2 does not respond to enter being pressed or anything. Earlier in the serial output it prompts me to press f to enter failsafe which works but when I try to setup wifi there it begins to give me more errors which I can include if necessary.

I would really appreciate any help to get this going as I am quite worried I have hurt the omega 2. It may or may not be relevant to mention that I am not using any docks and all connections are done manually with jumper cables.

Here is the serial output when it boots:
0_1481791350118_Serial Output.txt

Thanks in advance.

[fossette]

This post should be deleted so all replies go to:
https://community.onion.io/topic/1082/help-omega2-not-working