[Resolved] Console shows "Index of /console/" only. Seems like it reset completely, but didnt complete.
-
@Brad-Buskey said in [Resolved] Console shows "Index of /console/" only. Seems like it reset completely, but didnt complete.:
I had no idea I was going to have to be a old school sysadmin to be able to effectively use it.
If you where paying attention to the Kickstarter Video they mentioned to do things as Tony Stark. They just forgot to communicate that we have to be expert as he
-
I had a glimmer of hope after using /etc/init.d/console restart. It brought the console back to normal but after a restart, it was back to just showing Index of /console/.
It seems like the memory has issues keeping the files.
-
@Brad-Buskey After using your downgrade steps, I got this message:
root@Omega-B1A3:~# sysupgrade omega2p-v0.1.8-b148 Image metadata not found Invalid image type. Image check 'platform_check_image' failed.Hopefully there will be an upgrade that fixes this...
-
@Marty-Mickelson Try a different image file. there are plenty to choose from in the repo.
-
@Brad-Buskey Hm, so I tried using b150 and it seemed to work. I was able to go to the console page and start through the setup wizard again. It had issues with the wifi step. It showed my wifi networks and I chose the same one I've been using. It said configuring wifi for a really long time so I decided to restart it. I SSH'd to it and ran the install again. This time the upgrade failed writing to the firmware. The lights turned off and wifi doesn't work. When I turn it on, the lights blink for a few seconds, then go dark. I think I bricked it.
I'll look for how to manually fix it if it's possible. For now, I'm going to go drown my sorrows.
-
I ran into the wifi issue as well, after restoring from a mess I created. I ended up connecting via ssh, running wifisetup and setting it up that way. when you go through the web set up it will detect it is already connected and you can skip the wifi part and move on to the next part.
-
@Brad-Buskey did you have to connect through the usb if the wifi didn't work?
-
no, it showed up on my wifi list on my PC. but you can do that through the Serial connection if you have a doc that supports that (Expansion Dock or Mini Dock).
-
@Brad-Buskey como hiciste la conexión en serie con el muelle EXP?
-
@Brad-Buskey
my onion omega 2+ worked fine for 4 hours
But when I turned it off and then turned it on again, I connected to its AP. And this is what I get
Index of /console/
../
modified: Thu, 01 Jan 1970 00:00:15 GMT
directory - 0.00 kbytelib/
modified: Thu, 01 Jan 1970 00:00:15 GMT
directory - 0.00 kbyteItried rebooting it again and again.
Still I get the same results
-
@Jonathan-Gerard-Joseph
If you didn't find any useful tips in this fairly old thread... there are lots of same or very similar topics in the forum.
Plese read one of them - for example this one Get Index of /console/ instead of Console.
You can find also another method in the official Onion Omega2 Documentation how to setup the Wifi network (the Wifi station) eg. bywifisetupand/or how to (re)install the Console with ssh.Good luck!
-
@Jonathan-Gerard-Joseph when i first got my omegas this happened to me several times . then, rather than just pulling some plug or switching off what i did was enter reboot via terminal or ssh, wait for the omegas led to go off and then stop the power. in about 11 months of use it has not once corrupted the start up/console by using this method. others may say this does not matter, in fact the admins say to just cut power is fine, but in practice it seems to matter.
-
@György-Farkas
Thank you, Sir
-
@Douglas-Kryder
Thank you, Sir
