1. Home
  2. Projects
  3. Octoprint (3D print server) on Omega2+

Octoprint (3D print server) on Omega2+

  • F

    I gave up using o2+ for octoprint.
    A person at a local hackerspace ported octoprint to another board he is testing which has a mega and a chip running some sort of lede. His github is here

    https://github.com/robinjanssens/OctoPrint-for-MiCaBoard

    Maybe there is something you guys can also use for the O2+, I am going to see if I can get one of these boards and make my life easier.

    0
  • S

    I am able to run 1.3.4.

    mount -o remount,size=200M /tmp ==> To increase /tmp
    ln -s /usr/bin/gcc /usr/bin/ccache_cc ==> to install
    sed -i 's/Häußge/H./g' /root/OctoPrint-1.3.4/src/octoprint/util/comm.py
    sed -i 's/exit("You should not run OctoPrint as root!")/pass/g' /root/OctoPrint-1.3.4/src/octoprint/server/init.py

    Also, swap I did it in USB. Creating a swap file in SD card (ext4 format) was not working for me.

    0
  • M

    I seem to be having a memory issue on the "pip install -r requirements.txt" step.
    https://pastebin.com/xS4i0a2C
    ANy ideas how to combat this?

    0
  • T

    Got 1.3.5 to run, together with Cura.

    There are quite some hacks, but hope this is useful for you. Start from the comment of Jeff Karney (11 Mar 2017) - and do create the swap file of 512MB !

    Continue Octoprint Installation

    Replace step 3 with the following steps...

    cd /root
wget https://github.com/foosel/OctoPrint/archive/1.3.5.zip
unzip 1.3.5.zip

    Make sure everything can compile

    ln -s /usr/bin/gcc /usr/bin/ccache_cc

    Install all dependencies

    cd OctoPrint-1.3.5
pip install -r requirements.txt

    Fix unicode we can't deal with in the code

    sed -i 's/Häußge/H\./g' /root/OctoPrint-1.3.5/src/octoprint/util/comm.py
sed -i 's/Häußge/H\./g' /root/OctoPrint-1.3.5/src/octoprint/plugins/virtual_printer/virtual.py

    Start octoprint from command line (see article on how to auto-restart it on boot)

    octoprint serve --iknowwhatimdoing &

    Install Cura

    Install prerequisites

    opkg install make

    Download Cura legacy

    cd /root
wget https://github.com/Ultimaker/CuraEngine/archive/legacy.zip
unzip legacy.zip

    Here's a hack I found-out I needed since make failed (forgot how)

    echo "#undef LIBC_HAS_BACKTRACE_FUNC" > /usr/include/execinfo.h

    Then we can build Cura (it's long on the Omega2+)

    cd CuraEngine-legacy
make

    For some reason ld can't find the static libraries for c and stdc++ and the build fails. I couldn't fix this directly, but what I did was to remove the --static from the last build line and this works.

    so if your build fails with:
    /usr/bin/ld: cannot find -lstdc++ /usr/bin/ld: cannot find -lc collect2: error: ld returned 1 exit status
    then run this (or remove the --static from the last output of make):

    g++ build/bridge.o build/comb.o build/gcodeExport.o build/infill.o build/inset.o build
/layerPart.o build/main.o build/optimizedModel.o build/pathOrderOptimizer.o build/polygonOptimizer.o build/raft.o build/set
tings.o build/skin.o build/skirt.o build/slicer.o build/support.o build/timeEstimate.o build/modelFile/modelFile.o build/ut
ils/gettime.o build/utils/logoutput.o build/utils/socket.o -o build/CuraEngine -Lbuild/ -lclipper -flto

    Give Octoprint the path to Cura

    Run the Octoprint wizard: open http://omega-xxxx.local:5000 where xxxx are the 4 last digits of your Omega2+ mac address
    In the Cura Configuration step input the Octoprint setup Wizard CuraEngine:
    Path to CuraEngine: /root/CuraEngine-legacy/build/CuraEngine

    0
  • R

    @Theodore-Marescaux and @Jeff-Karney - thanks so much for the updated script. I've got Octoprint 1.3.5 working on my Omega 2+.

    However, I can't seem to connect to the 3d Printer. I've tried all the manual settings and baud rates but I get a 'Timeout while trying to connect to the printer' message.

    ----- Terminal Log -----
    Connecting to: /dev/ttyACM0
    Changing monitoring state from 'Offline' to 'Opening serial port'
    Connected to: Serial<id=0x232abc0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
    Changing monitoring state from 'Opening serial port' to 'Connecting'
    Send: N0 M110 N0*125
    Recv: ?
    There was a timeout while trying to connect to the printer
    Changing monitoring state from 'Connecting' to 'Offline'
    Connection closed, closing down monitor

    ----- Close Terminal Log -----

    Any ideas?

    0
  • P

    I know the last reply to this topic is from nearly a year ago, but just wanted to report that I just installed OctoPrint v1.3.9 on my Omega2+ with the latest 0.2.1 (b199) firmware (had 0.2 or the last of the 0.1 line and OctoPrint 1.0.0 when I used it last), and it seems to be working fine with my Kodama Trinus printer just fine... Thanks to all the posters who suggested the swap memory, python-dev/gcc and octoprint serve --iknowwhatimdoing workarounds / updates to the instructions... after some fumbling around I was able get it all working! 😉

    0
  • M

    First thank all contributor

    1.Change the package repository

    vi /etc/opkg/distfeeds.conf

    uncomment below line

    src/gz reboot_base
src/gz reboot_packages

    2.Setting SD Card As a expanding storage ( I use 2GB mini SDcard , Because out of space error)

    opkg update
opkg install fdisk e2fsprogs block-mount

    after install

    umount /dev/mmcblk0p1
mkfs.ext4 /dev/mmcblk0p1
umount /dev/mmcblk0p1
mkdir /mnt/SD
mount /dev/mmcblk0p1 /mnt/SD

    (will get some error like : can’t umount just ignore it)

    tar -C /overlay -cvf - . | tar -C /mnt/SD/ -xf - 
umount /mnt/SD

block detect > /etc/config/fstab

    Auto Load on system boot

    vi /etc/config/fstab

    change option target '/mnt/mmcblk0p1' to option target '/overlay'
    and option enabled '0' to option enabled ‘1'

    reboot

    after reboot you can verify if you /overlay is mounted properly by running df

    mkdir /overlay/tmp
rm -rf /overlay/tmp/*
cp -a /tmp/* /overlay/tmp/
umount /tmp
[ $? -ne 0 ] && {
umount -l /tmp
}
mount /overlay/tmp/ /tmp

    after reboot expand /tmp folder on the Omega , will get some error like : can’t umount just ignore it)

    3.Install C++ Lib & Python

    opkg update
opkg install gcc make 
opkg install python python-pip unzip
opkg install python-dev --force-overwrite

    4.Setting Swap memory (Because When install will get out of memory errors)

    https://docs.onion.io/omega2-docs/extending-omega-memory.html

    First insert your usbdisk

    opkg install swap-utils

    after install create swapfile on usb

    dd if=/dev/zero of=/tmp/mounts/USB-A1/swap.page bs=1M count=512

    Need Waiting a while

    mkswap /tmp/mounts/USB-A1/swap.page
swapon /tmp/mounts/USB-A1/swap.page

    Use free to check if success get swap

    5. Install Octoprint

    pip install --upgrade setuptools

    show some information to upgrade pip

    pip install --upgrade pip
pip install --upgrade setuptools

    Download octoprint & install
    You can get all version here
    https://github.com/foosel/OctoPrint/releases

    Prepare Install

    cd /root
wget https://github.com/foosel/OctoPrint/archive/1.3.9.zip
unzip 1.3.9.zip
cd OctoPrint-1.3.9

ln -s /usr/bin/gcc /usr/bin/ccache_cc

    Start Install

    pip install -r requirements.txt

    Some Unicode Fixed / User Role Fixed

    sed -i 's/Häußge/H\./g' /root/OctoPrint-1.3.9/src/octoprint/util/comm.py
sed -i 's/Häußge/H\./g' /root/OctoPrint-1.3.9/src/octoprint/util/virtual.py
sed -i 's/Häußge/H\./g' /root/OctoPrint-1.3.9/src/octoprint/plugins/virtual_printer/virtual.py

sed -i 's/exit("You should not run OctoPrint as root!")/pass/g' /root/OctoPrint-1.3.9/src/octoprint/server/__init__.py

    If has no error.
    Congratulation !
    Almost Success!

    6.Server Start

    octoprint serve --iknowwhatimdoing &

    Need Waiting Server to Start / console will show some infor & some warning information / Just Ignore
    Use browser to connect
    http://omega-[your id].local:5000

    If connect Ok.
    Now You can remove usb disk and connect to 3d printer.
    Success!!

    Print the case
    https://www.thingiverse.com/thing:2068124!

    Sometimes Factory Reset Clean All to Install Will Help , if you get some stange error

    https://docs.onion.io/omega2-docs/factory-reset.html

    THANKS ALL

    3 D 1 Reply
  • D

    This post is deleted!
    0
  • D

    I got Octoprint 1.5.1 to work with my Omega2+. Instructions are basically the same as @Ming-Chou-Cheng wrote, but I had to change some minor things. I'll post details if anyone is interested, let me know.

    0 C 1 Reply
  • C

    @dude8604 please post the details so new players can benefit from your experience.

    0 D 1 Reply
  • D

    @crispyoz I created a new thread https://community.onion.io/topic/4349/octoprint-1-5-2-3d-print-server-on-omega2

    0
3d print 8 octoprint 4
Log in to reply
 

Looks like your connection to Community was lost, please wait while we try to reconnect.