Console splash screen but no logon popup

Andy Burgess

Hi all,
I have an Omega2+ running omega2p-v0.1.9-b149.bin (upgraded via USB)
Went through the initial setup wizard but it failed at wi-fi setup however it has connected to my home wif.
I can connect via Putty on 192.169.3.1 and the local wifi address 192.168.1.106
I'm behind a proxy and think that is blocking the internet connection
To install the console first I followed
---To use opkg through a proxy, add the following to /etc/opkg.conf:
option http_proxy http://xxx.xx.x.x:8080/
option ftp_proxy ftp://xxx.xx.x.x:8080/
I installed the console from the command line using
opkg update
opkg install onion-console-base
Then did a reboot
Now at 192.168.1.106 and 192.169.3.1 and http://omega-xxxf.local/ I get a blank console screen.

From https://lede-project.org/docs/user-guide/firewall_configuration?s[]=proxy
I followed this example

Transparent proxy rule (external)
The following rule redirects all outgoing HTTP traffic from lan through an external proxy at 192.168.1.100 listening on port 3128. It assumes the OpenWrt lan address to be 192.168.1.1 - this is needed to masquerade redirected traffic towards the proxy.

config redirect
option src lan
option proto tcp
option src_ip !192.168.1.100
option src_dport 80
option dest_ip 192.168.1.100
option dest_port 3128
option target DNAT

config redirect
option dest lan
option proto tcp
option src_dip 192.168.1.1
option dest_ip 192.168.1.100
option dest_port 3128
option target SNAT

But changed it for my info
config redirect
option src lan
option proto tcp
option src_ip 192.168.1.106
option src_dport 80
option dest_ip xxx.xx.x.x
option dest_port 8080
option target DNAT

config redirect
option dest lan
option proto tcp
option src_dip 192.168.1.106
option dest_ip xxx.xx.x.x
option dest_port 8080
option target SNAT

to /etc/config/firewall
I did change the line from the example
option src_ip !192.168.1.100
to my local IP and not the proxy IP ??? I think there is a mistake in their example.

Still no Good
I'm out of ideas.
I think it still can't access the internet because of the proxy. Can anyone confirm the icons /content come form the internet for the console screen and what thi address / IP is that it connect too.
Or any other help
Cheers Andy

Andy Burgess

Ok It turned out my browser was the problem.
IE and Chrome just had blank Console Screens
Firefox worked great on windows 7.
I think the proxy rule is correct.

I even managed to switch on relays on the relay expansion.

Cheers Andy

Kit Bishop

@Andy-Burgess said in Console splash screen but no logon popup:

Ok It turned out my browser was the problem.
IE and Chrome just had blank Console Screens
Firefox worked great on windows 7.

Interesting. The original code for the Omega1 had problems with Firefox but worked OK with Chrome