Cannot connect to WiFi using anything.

[demistigon]

So i am very new to anything here. I just got my hands on omega 2 and i tried connecting to the WiFi using the all method. i am not successful. I am getting this error. if anyone could find me a solution then it would be really helpful.
Thank You.

root@Omega-E5CD:/# wifisetup
Onion Omega Wifi Setup

Select from the following:

1. Scan for Wifi networks
2. Type network info
   q) Exit

Selection: 1
Scanning for wifi networks...

Select Wifi network:

1. WiFi-3FUJ
2. FoxtelHub6E8D
3. Angel
4. Angelguest
5. DIRECT-52-HP Officejet 5740
6. WiFi-9ZVP
7. OPTUSDNF75234
8. WiFi-B7EN
9. WiFi-86GU
10. WiFi-JYB8
11. WiFi-B2TR
12. iiNet9A48B7

Selection: 10
Network: WiFi-JYB8
Authentication type: WPA2PSK
Enter password: **********

Restarting wifimanager for changes to take effect
root@Omega-E5CD:/# [ 122.594260] br-wlan: port 2(ra0) entered disabled state
[ 123.091120] EEPROM:Read from [factory] offset 0x0,length 0x400.
[ 125.580756] ch1 bssid=44:6e:e5:ca:a7:bc
[ 125.584755] ch1 bssid=80:37:73:e1:6e:8d
[ 125.588759] ch2 bssid=48:3c:0c:29:a9:08
[ 125.592773] ch2 bssid=48:3c:0c:29:a9:09
[ 125.596754] ch3 bssid=48:3c:0c:29:a6:e4
[ 125.600749] ch3 bssid=34:64:a9:3e:37:53
[ 125.604728] ch4 bssid=84:1b:5e:f7:52:34
[ 125.608708] ch5 bssid=44:6e:e5:ca:09:d4
[ 125.612701] ch8 bssid=44:6e:e5:cb:41:74
[ 125.616680] ch10 bssid=48:3c:0c:28:da:00
[ 125.620761] ch11 bssid=e0:b9:e5:9a:48:b7
[ 125.624828] ch11 bssid=00:60:64:b1:03:78
[ 125.628889] =====================================================
[ 125.635087] Channel 1 : Dirty = 304, False CCA = 0, Busy Time = 2902, Skip Ch annel = FALSE
[ 125.643480] Channel 2 : Dirty = 320, False CCA = 0, Busy Time = 3468, Skip Ch annel = FALSE
[ 125.651872] Channel 3 : Dirty = 330, False CCA = 0, Busy Time = 3061, Skip Ch annel = FALSE
[ 125.660249] Channel 4 : Dirty = 290, False CCA = 0, Busy Time = 2921, Skip Ch annel = FALSE
[ 125.668642] Channel 5 : Dirty = 270, False CCA = 0, Busy Time = 2690, Skip Ch annel = FALSE
[ 125.677028] Channel 6 : Dirty = 196, False CCA = 0, Busy Time = 40, Skip Chan nel = FALSE
[ 125.685245] Channel 7 : Dirty = 188, False CCA = 0, Busy Time = 640, Skip Cha nnel = FALSE
[ 125.693550] Channel 8 : Dirty = 190, False CCA = 0, Busy Time = 2713, Skip Ch annel = FALSE
[ 125.701943] Channel 9 : Dirty = 140, False CCA = 0, Busy Time = 9931, Skip Ch annel = FALSE
[ 125.710319] Channel 10 : Dirty = 172, False CCA = 0, Busy Time = 13499, Skip Channel = FALSE
[ 125.718888] Channel 11 : Dirty = 206, False CCA = 0, Busy Time = 13235, Skip Channel = FALSE
[ 125.727445] =====================================================
[ 125.733638] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 9
[ 125.742377] Min Dirty = 140
[ 125.745207] ExChannel = 0 , 0
[ 125.748212] BW = 20
[ 125.779729] br-wlan: port 2(ra0) entered forwarding state
[ 125.785313] br-wlan: port 2(ra0) entered forwarding state
[ 127.780804] br-wlan: port 2(ra0) entered forwarding state
[ 144.560096] br-wlan: port 2(ra0) entered disabled state
[ 145.652409] EEPROM:Read from [factory] offset 0x0,length 0x400.
[ 148.140756] ch1 bssid=8c:0d:76:35:30:00
[ 148.144755] ch1 bssid=80:37:73:e1:6e:8d
[ 148.148733] ch1 bssid=44:6e:e5:ca:a7:bc
[ 148.152742] ch2 bssid=48:3c:0c:29:a9:08
[ 148.156720] ch2 bssid=48:3c:0c:29:a9:09
[ 148.160700] ch3 bssid=48:3c:0c:29:a6:e4
[ 148.164696] ch3 bssid=34:64:a9:3e:37:53
[ 148.168678] ch5 bssid=44:6e:e5:ca:09:d4
[ 148.172680] ch8 bssid=44:6e:e5:cb:41:74
[ 148.176660] ch10 bssid=8c:0d:76:34:d1:78
[ 148.180742] ch10 bssid=48:3c:0c:28:da:00
[ 148.184809] ch11 bssid=e0:b9:e5:9a:48:b7
[ 148.188870] =====================================================
[ 148.195077] Channel 1 : Dirty = 350, False CCA = 0, Busy Time = 5516, Skip Channel = FALSE
[ 148.203474] Channel 2 : Dirty = 324, False CCA = 0, Busy Time = 5377, Skip Channel = FALSE
[ 148.211867] Channel 3 : Dirty = 316, False CCA = 0, Busy Time = 4001, Skip Channel = FALSE
[ 148.220244] Channel 4 : Dirty = 244, False CCA = 0, Busy Time = 317, Skip Channel = FALSE
[ 148.228550] Channel 5 : Dirty = 258, False CCA = 0, Busy Time = 814, Skip Channel = FALSE
[ 148.236849] Channel 6 : Dirty = 188, False CCA = 0, Busy Time = 640, Skip Channel = FALSE
[ 148.245154] Channel 7 : Dirty = 168, False CCA = 0, Busy Time = 1393, Skip Channel = FALSE
[ 148.253548] Channel 8 : Dirty = 174, False CCA = 0, Busy Time = 2518, Skip Channel = FALSE
[ 148.261941] Channel 9 : Dirty = 144, False CCA = 0, Busy Time = 10995, Skip Channel = FALSE
[ 148.270423] Channel 10 : Dirty = 210, False CCA = 0, Busy Time = 11013, Skip Channel = FALSE
[ 148.278994] Channel 11 : Dirty = 168, False CCA = 0, Busy Time = 11658, Skip Channel = FALSE
[ 148.287553] =====================================================
[ 148.293747] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 9
[ 148.302487] Min Dirty = 144
[ 148.305317] ExChannel = 0 , 0
[ 148.308321] BW = 20
[ 148.340557] br-wlan: port 2(ra0) entered forwarding state
[ 148.346148] br-wlan: port 2(ra0) entered forwarding state
[ 150.340739] br-wlan: port 2(ra0) entered forwarding state

root@Omega-E5CD:/# > Restarting wifimanager for changes to take effect
root@Omega-E5CD:/# [ 122.594260] br-wlan: port 2(ra0) entered disabled state
[ 123.091120] EEPROM:Read from [factory] offset 0x0,length 0x400.
[ 125.580756] ch1 bssid=44:6e:e5:ca:a7:bc
[ 125.584755] ch1root@Omega-E5CD:/# root@Omega-E5CD:/# [ 122.594260] br-wlan: port 2(ra0) entere
d disabled state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 123.091120] EEPROM:Read from [factory] offset 0x0,length 0
x400.
ash: missing ]
root@Omega-E5CD:/# [ 125.580756] ch1 bssid=44:6e:e5:ca:a7:bc
ash: missing ]
root@Omega-E5CD:/# [ 125.584755] ch1 bssid=80:37:73:e1:6e:8d
ash: missing ]
root@Omega-E5CD:/# [ 125.588759] ch2 bssid=48:3c:0c:29:a9:08
ash: missing ]
root@Omega-E5CD:/# [ 125.592773] ch2 bssid=48:3c:0c:29:a9:09
ash: missing ]
root@Omega-E5CD:/# [ 125.596754] ch3 bssid=48:3c:0c:29:a6:e4
ash: missing ]
root@Omega-E5CD:/# [ 125.600749] ch3 bssid=34:64:a9:3e:37:53
ash: missing ]
root@Omega-E5CD:/# [ 125.604728] ch4 bssid=84:1b:5e:f7:52:34
ash: missing ]
root@Omega-E5CD:/# [ 125.608708] ch5 bssid=44:6e:e5:ca:09:d4
ash: missing ]
root@Omega-E5CD:/# [ 125.612701] ch8 bssid=44:6e:e5:cb:41:74
ash: missing ]
root@Omega-E5CD:/# [ 125.616680] ch10 bssid=48:3c:0c:28:da:00
ash: missing ]
root@Omega-E5CD:/# [ 125.620761] ch11 bssid=e0:b9:e5:9a:48:b7
ash: missing ]
root@Omega-E5CD:/# [ 125.624828] ch11 bssid=00:60:64:b1:03:78
ash: missing ]
root@Omega-E5CD:/# [ 125.628889] ==============================================

ash: missing ]
root@Omega-E5CD:/# [ 125.635087] Channel 1 : Dirty = 304, False CCA = 0, Busy T
ime = 2902, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.643480] Channel 2 : Dirty = 320, False CCA = 0, Busy T
ime = 3468, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.651872] Channel 3 : Dirty = 330, False CCA = 0, Busy T
ime = 3061, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.660249] Channel 4 : Dirty = 290, False CCA = 0, Busy T
ime = 2921, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.668642] Channel 5 : Dirty = 270, False CCA = 0, Busy T
ime = 2690, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.677028] Channel 6 : Dirty = 196, False CCA = 0, Busy T
ime = 40, Skip Chan nel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.685245] Channel 7 : Dirty = 188, False CCA = 0, Busy T
ime = 640, Skip Cha nnel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.693550] Channel 8 : Dirty = 190, False CCA = 0, Busy T
ime = 2713, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.701943] Channel 9 : Dirty = 140, False CCA = 0, Busy T
ime = 9931, Skip Ch annel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.710319] Channel 10 : Dirty = 172, False CCA = 0, Busy
Time = 13499, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.718888] Channel 11 : Dirty = 206, False CCA = 0, Busy
Time = 13235, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 125.727445] ==============================================

ash: missing ]
root@Omega-E5CD:/# [ 125.733638] Rule 1 CCA value : Min Dirtiness (Include exte
nsion channel) ==> Select Channel 9
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 125.742377] Min Dirty = 140
ash: missing ]
root@Omega-E5CD:/# [ 125.745207] ExChannel = 0 , 0
ash: missing ]
root@Omega-E5CD:/# [ 125.748212] BW = 20
ash: missing ]
root@Omega-E5CD:/# [ 125.779729] br-wlan: port 2(ra0) entered forwarding state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 125.785313] br-wlan: port 2(ra0) entered forwarding state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 127.780804] br-wlan: port 2(ra0) entered forwarding state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 144.560096] br-wlan: port 2(ra0) entered disabled state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 145.652409] EEPROM:Read from [factory] offset 0x0,length 0
x400.
ash: missing ]
root@Omega-E5CD:/# [ 148.140756] ch1 bssid=8c:0d:76:35:30:00
ash: missing ]
root@Omega-E5CD:/# [ 148.144755] ch1 bssid=80:37:73:e1:6e:8d
ash: missing ]
root@Omega-E5CD:/# [ 148.148733] ch1 bssid=44:6e:e5:ca:a7:bc
ash: missing ]
root@Omega-E5CD:/# [ 148.152742] ch2 bssid=48:3c:0c:29:a9:08
ash: missing ]
root@Omega-E5CD:/# [ 148.156720] ch2 bssid=48:3c:0c:29:a9:09
ash: missing ]
root@Omega-E5CD:/# [ 148.160700] ch3 bssid=48:3c:0c:29:a6:e4
ash: missing ]
root@Omega-E5CD:/# [ 148.164696] ch3 bssid=34:64:a9:3e:37:53
ash: missing ]
root@Omega-E5CD:/# [ 148.168678] ch5 bssid=44:6e:e5:ca:09:d4
ash: missing ]
root@Omega-E5CD:/# [ 148.172680] ch8 bssid=44:6e:e5:cb:41:74
ash: missing ]
root@Omega-E5CD:/# [ 148.176660] ch10 bssid=8c:0d:76:34:d1:78
ash: missing ]
root@Omega-E5CD:/# [ 148.180742] ch10 bssid=48:3c:0c:28:da:00
ash: missing ]
root@Omega-E5CD:/# [ 148.184809] ch11 bssid=e0:b9:e5:9a:48:b7
ash: missing ]
root@Omega-E5CD:/# [ 148.188870] ==============================================

ash: missing ]
root@Omega-E5CD:/# [ 148.195077] Channel 1 : Dirty = 350, False CCA = 0, Busy T
ime = 5516, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.203474] Channel 2 : Dirty = 324, False CCA = 0, Busy T
ime = 5377, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.211867] Channel 3 : Dirty = 316, False CCA = 0, Busy T
ime = 4001, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.220244] Channel 4 : Dirty = 244, False CCA = 0, Busy T
ime = 317, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.228550] Channel 5 : Dirty = 258, False CCA = 0, Busy T
ime = 814, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.236849] Channel 6 : Dirty = 188, False CCA = 0, Busy T
ime = 640, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.245154] Channel 7 : Dirty = 168, False CCA = 0, Busy T
ime = 1393, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.253548] Channel 8 : Dirty = 174, False CCA = 0, Busy T
ime = 2518, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.261941] Channel 9 : Dirty = 144, False CCA = 0, Busy T
ime = 10995, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.270423] Channel 10 : Dirty = 210, False CCA = 0, Busy
Time = 11013, Skip Channel = FALSE
ash: missing ]
root@Omega-E5CD:/# [ 148.278994] Channel 11 : Dirty = 168, False CCA = 0, Busy
Time = 11658, Skip Channel = FALSE
]ash: missing ]
root@Omega-E5CD:/# [ 148.287553] ==============================================

ash: missing ]
root@Omega-E5CD:/# [ 148.293747] Rule 1 CCA value : Min Dirtiness (Include exte
nsion channel) ==> Select Channel 9
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 148.302487] Min Dirty = 144
ash: missing ]
root@Omega-E5CD:/# [ 148.305317] ExChannel = 0 , 0
ash: missing ]
root@Omega-E5CD:/# [ 148.308321] BW = 20
]ash: missing ]
root@Omega-E5CD:/# [ 148.340557] br-wlan: port 2(ra0) entered forwarding state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 148.346148] br-wlan: port 2(ra0) entered forwarding state
/bin/ash: syntax error: unexpected "("
root@Omega-E5CD:/# [ 150.340739] br-wlan: port 2(ra0) entered forwarding state
/bin/ash: syntax error: unexpected "("

• [list item](link url)

[José Luis Cánovas]

I refuse to read your post as is, and I don't have time now, so in the meantime, edit it and use markdown for code to format your post.
Use 3 ``` before and after a block text to get something like:

Your error here please.

[Richard Berg]

Simple things..

We see it scanned the SSID properly and you chose the WiFi-JYB8 ap so to confirm your security on the ap is indeed WPA2?
Is the password correct? CAPS LOCK on by chance? How is the WiFi setup? There could be so many things here that could be wrong but until you've ruled out the ones that you have control over; we can't help on the things you don't.

I have also seen, not on the Omega2's, where a 5ghz N Channel will get picked up by a scan but the 2.4ghz radio won't connect to it. It depends if the channel for 5ghz is locked or will downgrade for a 2.4ghz connection.

Again, many things that you can check and if you gave more info on what you've tried already; it would help. Just posting what you have with no real description doesn't help anyone.

Good luck with her and will follow along..