Omega 2+: first setup firmware upgrade fails

Samuel Krajnik

Hey Guys,

I just received my Onion Omega 2+ yesterday. I wanted to set it up, but as soon as it gets to downloading the firmware upgrade, it gets stuck. I tried to do it via the normal browser setup. That didn´t worked out very well, so I connected to Omega via SSH. No problem so far, but as I start the oupgrade command, it gets stuck too. And its ALWAYS at 97%.

The Omega is connected with my shared wifi hotspot, provided by my MacBook.

I already tried, as dumb as it sounds in my situation, to use different power cables, what didn´t helped.

Is there any way to download a upgrade somewhere else?
Or do I have to contact the Onion Team?

I hope you understand what my problem is.

Best regards
Samuel

Chris Stratton

There is a sever somewhere (search the threads) where you can download an image, be careful though as at the moment build 160 is the last which works - if you follow a more automated process you may well get one of the newer builds which will crash on boot.

José Luis Cánovas

Here is the images repo. Use the b160 for omega2p. And here the docs.

Luciano S.

This might be also a interesting question:
https://community.onion.io/topic/1804/