translate rpi script to omega2+ script [newbie]

Gabriel Giani

hello im baby rookie newbie on the omega scene!

i have a 8 Channel Relay and i want to use on my omega2+, i use a python script, i found on the web, i paste here the plain script if some one can help me to translate to use this on the omega "saves my life"

this is the script:

#!/usr/bin/python
import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)

# init list with pin numbers

pinList = [2, 3, 4, 17, 27, 22, 10, 9]

# loop through pins and set mode and state to 'low'

for i in pinList: 
    GPIO.setup(i, GPIO.OUT) 
    GPIO.output(i, GPIO.HIGH)

# time to sleep between operations in the main loop

SleepTimeL = 2

# main loop

try:
  GPIO.output(2, GPIO.LOW)
  print "ONE"
  time.sleep(SleepTimeL); 
  GPIO.output(3, GPIO.LOW)
  print "TWO"
  time.sleep(SleepTimeL);  
  GPIO.output(4, GPIO.LOW)
  print "THREE"
  time.sleep(SleepTimeL);
  GPIO.output(17, GPIO.LOW)
  print "FOUR"
  time.sleep(SleepTimeL);
  GPIO.output(27, GPIO.LOW)
  print "FIVE"
  time.sleep(SleepTimeL);
  GPIO.output(22, GPIO.LOW)
  print "SIX"
  time.sleep(SleepTimeL);
  GPIO.output(10, GPIO.LOW)
  print "SEVEN"
  time.sleep(SleepTimeL);
  GPIO.output(9, GPIO.LOW)
  print "EIGHT"
  time.sleep(SleepTimeL);
  GPIO.cleanup()
  print "Good bye!"

# End program cleanly with keyboard
except KeyboardInterrupt:
  print "  Quit"

  # Reset GPIO settings
  GPIO.cleanup()


# find more information on this script at
# http://youtu.be/oaf_zQcrg7g

this is the web from the script

thanks!!! and Sorry for my english!!!!!

Denis Mikhalsky

Read the docs, everything is there and is explained clearly.
https://docs.onion.io/omega2-docs/gpio-python-module.html

You have to replace pi-style gpio calls by omega-style, eg instead of GPIO.output(9, GPIO.LOW)

use

status = gpio9.setValue(0)