[Solved] Omega2p Warp upgrade fails ?
An upgrade with
fails with the error msg :
"> ERROR: Could not connect to Onion Firmware Server! Check your internet connection and try again!"
The internet connection is working and "ping repo.onion.io
PING repo.onion.io (220.127.116.11): 56 data bytes
64 bytes from 18.104.22.168: seq=0 ttl=44 time=104.056 ms" works as shown!
downloads the file, but
stops and reboot after:
' Saving config files...
killall: watchdog: no process killed
Sending TERM to remaining processes ... onion-helper udhcpc udhcpc'
And deletes the downloaded firmware file.
Seems to be a corrupt download.
Downloaded WRAPCore again, copied it on a USB stick and renamed it "Omage2.bin"
holding the reset button while rebooting, choose "2Load from USB"
and after some minutes the problem was solved
Thanks for sharing your solution. We will go and mark you thread as solved.
@Zheng-Han You should simple provide some checksum file for each img (bin) file in the repo.