SPI Bus in Python
-
@Lazar-Demin the docker make takes a tonne of time and crashes and only seems to work 1/2 decent on a native Linux host instead of a VM on Windows host.
Would you have steps to compile a custom spidev outside of the feeds/onion/python-spidev ? This would be really useful in getting more contributions. I believe the toolchain is the biggest hurdle.
Perhaps run a CI which regularly builds the toolchain and docker snapshots for easier pull.
-
@Tisham-Dhar Yeah, we use a pretty powerful Linux server to build the firmware. You'll notice in our Build System readme that we recommend running Docker on a Linux sytem.
Don't really have instructions to build python-spidev outside of the build system. The CI is a good idea, we'll look into it and see how we can fit that into our road map.
-
@Lazar-Demin I successfully staged and built python-spidev in isolation like this:
make package/python-spidev/{clean,compile,install} V=s
With a very handy tip from OpenWRT here.
This does not take tonnes of time compared to "make world" and is super useful for focusing my contribution. I will fork your python-spidev, patch it with xfer3 , update git link in feed to point to my fork and hack it till it works.
Anyone else is welcome to help me out and join the fun @Maximilian-Gerhardt
Regards,
-
@Tisham-Dhar Ah I misunderstood what you meant by "compile a custom spidev outside of the feeds/onion/python-spidev"
Yes, what you're doing is a good idea.
I would also suggest looking into theUSE_SOURCE_DIRflag, it allows you to use/compile a local copy of the package source code. More info here.
-
I have started a fork an have been making Python signature commits to it. The core xfer3 logic is currently a TODO. If @Lazar-Demin can review and suggest an implementation it will be much appreciated.
-
@Tisham-Dhar the core logic can follow this function here: https://github.com/OnionIoT/omega2-lmic-lorawan/blob/master/native-spi.cpp#L110
Essentially it does two distinct transfers, one for writing and one immediately afterward for reading.
-
EDIT Sep 22, 2023: Updating below commands so Python3 version of spidev module is installed, as Python2 is now legacy
@Tisham-Dhar I've gone ahead and implemented a working half-duplex transmission function! Version 4.0.1 of
python3-spidevfeatures a newxfer3function.Getting the Latest Version of
python3-spidevIf you don't have it installed already:
opkg update opkg install python3-light python3-spidevIf you have it installed, you'll need to upgrade:
opkg update opkg upgrade python3-spidevTo use the new function:
values = spi.xfer3([<list of bytes to write>], <number of bytes to read>)This will write all of the bytes from the list in the first argument and will then immediately read the number of bytes specified by the second argument.
The function will return a list of the bytes that were read.
An Example
Instead of using
spi.xfer([0x80,0xD9,0x00,0x00])Try
values = spi.xfer3([0x80,0xD9], 2)More Details
More details can be found in our python-spidev github repo readme
Let me know how it goes!
-
@Lazar-Demin Is this still just for python 2??? is there a python 3 version??
-
@Juan-Pablo-Jimenez A python3 version is now available as well! See https://github.com/OnionIoT/python-spidev#installation-on-omega2
-
@Lazar-Demin I cannot install version for python3.. it says "Unknown package 'python3-spidev'"
-
@Pablo-Fonovich Which firmware version are you running?
I ask because python3-spidev is published in the new package repo. Try upgrading your firmware to v0.3.0 or higher and trying again.
-
@Lazar-Demin Oh thanks! i had updated to the latest stable. I'm trying right now.
-
@Lazar-Demin That worked! thanks.. are gpio and serial packages available for pyhton3?
-
@Pablo-Fonovich you can get a list of available python3 packages by running:
opkg opkg list | grep python3You can also install
python3-pipto install Python packages, see this guide for more details.
-
@Lazar-Demin , thanks, i've already knew that... but i cannot find any gpio module for python3, nor can i find a serial module for python3.. Are they available?
-
@Lazar-Demin Hey, sorry to continue this after this long. but i started with a second device, isntalled python3-pip, but command line says pip3 not found.. what could be happening?
-
@Lazar-Demin In fact, i can see pip3 binary in /usr/bin/, but running it, even with full absolute path, returns not found error
-
Maybe take a look at Lazar's recent response
https://community.onion.io/topic/3591/python3-modules-for-gpio-and-serial-port/9
