We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.

Defining AP channel at Onion Omega 2+

  • I tried to define static AP channel. As I understand it defined in
    option channel 'auto'
    I changed it to '1'.
    uci show wireless print me:
    config wifi-device 'radio0'
    option type 'ralink'
    option variant 'mt7628'
    option country 'US'
    option hwmode '11g'
    option htmode 'HT20'
    option channel '1'
    option disabled '0'
    option device_mode 'apsta'
    option op_mode 'preference'

    But see AP on channel 12, configuration still not works.
    Some idea?
    Thank you, Shimon

  • @Shimon-Filtzer take a look at the OpenWrt docs https://openwrt.org/docs/guide-user/network/wifi/basic there are some restrictions on what you can select. Since the warp core driver is not documented or open source it may not implement all functions/parameters but we cannot tell.

  • Dear crispyoz! Thank you for answer. I saw the document, but as you wrote " Since the warp core driver is not documented or open source it may not implement all functions", it's a current status. Interesting, that in 2016, was a similar issue: https://community.onion.io/topic/1138/connecting-the-omega2-to-wifi-channels-12-to-14-for-non-us-users

    I think, RnD team must to know, when we change option country, or option htmode, or option channel parameters in file /etc/confog/wireles, system behavior becomes unstable.
    Every 5 seconds the system freezes and does not respond on ping for 1-2 seconds.
    My problem, that sometime system wakes up on Channels 10/11/12, but we can not use these channels, according to regulation acts.
    In case, that issue hasn't solution, we can not use Onion Omega in our product.

Log in to reply

Looks like your connection to Community was lost, please wait while we try to reconnect.