How to Install Mosquitto MQTT Broker on Omega2+?

Alexandr Didenko

How to Install Mosquitto MQTT Broker on Omega2s+?

UFD

Should be as simple as:

opkg update 
opkg install mosquitto mosquitto-client

Alexandr Didenko

@UFD thanx. I type this:

opkg install mosquitto mosquitto-client libmosquitto

György Farkas

@Alexandr-Didenko "Naturally" you didn't say anything about your Omega2+'s firmware (as usual;)

Omega Firmware Changelog

So - for example on a vanilla v0.2.0-b197 ... v0.3.2 b232 firmware - mosquitto has already installed.
Run a top command even on your freshly installed Omega2+ please.

# Omega2+ with v0.3.2 b232 firmware

root@Omega-5BE1:/# opkg list-installed | grep -i mosquitto
libmosquitto-ssl - 1.5.8-2
mosquitto-client-ssl - 1.5.8-2
mosquitto-ssl - 1.5.8-2

root@Omega-5BE1:/# opkg info mosquitto-ssl
Package: mosquitto-ssl
Version: 1.5.9-2
Depends: libc, librt, libuuid, libopenssl, libwebsockets-openssl
Provides: mosquitto
Status: unknown ok not-installed
Section: net
Architecture: mipsel_24kc
Size: 76962
Filename: mosquitto-ssl_1.5.9-2_mipsel_24kc.ipk
Description: Mosquitto is an open source (BSD licensed) message broker that implements
 the MQTT protocol version 3.1 and 3.1.1. MQTT provides a lightweight
 method of carrying out messaging using a publish/subscribe model.
 
 This package also includes some basic support for configuring via UCI
 This package is built with SSL support.  TLS-PSK will be included (in both
 the client and broker) if OpenSSL is built with TLS-PSK support.

Package: mosquitto-ssl
Version: 1.5.8-2
Depends: libc, librt, libuuid, libopenssl, libwebsockets-openssl
Provides: mosquitto
Status: install user installed
Architecture: mipsel_24kc
Conffiles:
 /etc/mosquitto/mosquitto.conf cad5c6ae4ecf25e2709e88f2b92d75905ac4aedc622df6e9a536238c0b047856
 /etc/config/mosquitto eaa6b71fbd8e5f7142d949432374017e4cb5d01cf5039b9cd4a65f8953126521
Installed-Time: 1566829837

root@Omega-5BE1:/# mosquitto -h
mosquitto version 1.5.8

mosquitto is an MQTT v3.1.1 broker.

Usage: mosquitto [-c config_file] [-d] [-h] [-p port]

 -c : specify the broker config file.
 -d : put the broker into the background after starting.
 -h : display this help.
 -p : start the broker listening on the specified port.
      Not recommended in conjunction with the -c option.
 -v : verbose mode - enable all logging types. This overrides
      any logging options given in the config file.

See http://mosquitto.org/ for more information.

Searfoss Jonas

This post is deleted!