We have upgraded the community system as part of the upgrade a password reset is required for all users before login in.
How to Install Mosquitto MQTT Broker on Omega2+?
-
How to Install Mosquitto MQTT Broker on Omega2s+?
-
Should be as simple as:
opkg update opkg install mosquitto mosquitto-client
-
@UFD thanx. I type this:
opkg install mosquitto mosquitto-client libmosquitto
-
@Alexandr-Didenko "Naturally" you didn't say anything about your Omega2+'s firmware (as usual;)
Omega Firmware Changelog
So - for example on a vanilla v0.2.0-b197 ... v0.3.2 b232 firmware - mosquitto has already installed.
Run atop
command even on your freshly installed Omega2+ please.# Omega2+ with v0.3.2 b232 firmware root@Omega-5BE1:/# opkg list-installed | grep -i mosquitto libmosquitto-ssl - 1.5.8-2 mosquitto-client-ssl - 1.5.8-2 mosquitto-ssl - 1.5.8-2 root@Omega-5BE1:/# opkg info mosquitto-ssl Package: mosquitto-ssl Version: 1.5.9-2 Depends: libc, librt, libuuid, libopenssl, libwebsockets-openssl Provides: mosquitto Status: unknown ok not-installed Section: net Architecture: mipsel_24kc Size: 76962 Filename: mosquitto-ssl_1.5.9-2_mipsel_24kc.ipk Description: Mosquitto is an open source (BSD licensed) message broker that implements the MQTT protocol version 3.1 and 3.1.1. MQTT provides a lightweight method of carrying out messaging using a publish/subscribe model. This package also includes some basic support for configuring via UCI This package is built with SSL support. TLS-PSK will be included (in both the client and broker) if OpenSSL is built with TLS-PSK support. Package: mosquitto-ssl Version: 1.5.8-2 Depends: libc, librt, libuuid, libopenssl, libwebsockets-openssl Provides: mosquitto Status: install user installed Architecture: mipsel_24kc Conffiles: /etc/mosquitto/mosquitto.conf cad5c6ae4ecf25e2709e88f2b92d75905ac4aedc622df6e9a536238c0b047856 /etc/config/mosquitto eaa6b71fbd8e5f7142d949432374017e4cb5d01cf5039b9cd4a65f8953126521 Installed-Time: 1566829837 root@Omega-5BE1:/# mosquitto -h mosquitto version 1.5.8 mosquitto is an MQTT v3.1.1 broker. Usage: mosquitto [-c config_file] [-d] [-h] [-p port] -c : specify the broker config file. -d : put the broker into the background after starting. -h : display this help. -p : start the broker listening on the specified port. Not recommended in conjunction with the -c option. -v : verbose mode - enable all logging types. This overrides any logging options given in the config file. See http://mosquitto.org/ for more information.
-
This post is deleted!