Omega2 LTE and USB Hub/Host
I have some problems to understand how to connect a USB Device to the Omega2 LTE.
At the pinout are the ports (D+/D+) marked as NC. The LTE/GNSS modul is internal
connected to USB. Can I get access somewere to the internal USB Hub and is an expansion available for this?
@cbrede The LTE/GNSS module is connected directly to the USB Host Port of Omega2S+ on the Omega2 LTE board.
The USB+ and USB- pins of the boards Expansion Header are not connected - so they are marked as N/C.
The Omega2 module (the SoC) does not have any internal USB Hub.